Power
Power specifications| Engine | 125 hp gross |
|---|
| PTO | 105 hp claimed |
|---|
| PTO, tested | 122.6 hp |
|---|
| Drawbar | 90.9 hp tested |
|---|
| Listed power | 125 hp engine basis |
|---|
Engines
Engines fitted to the CaseIH Maxxum 125| FPT 6.7L 6-cyl dieselDiesel · 6 cyl | 411 ci |
|---|
| Engine | 411 ci |
|---|
Engine details
- FPT 6.7L 6-cyl diesel
- Bore × stroke
- 4.09 in × 5.2 in
- Rated speed
- 2,200 rpm
- Rated power
- 125 hp
- Torque
- 409 lb·ft at 1,250 rpm
- Compression
- 17.5:1
- Cooling
- liquid-cooled inline
- Emissions
- Tier 3
- Firing order
- 1-5-3-6-2-4
- Notes
- 6-cylinder 12-valve. The 12-valve mechanically-injected engine was used the on the base model Maxxum 125 Value.
- Engine
- Bore × stroke
- 4.09 in × 5.2 in
- Rated speed
- 2,200 rpm
- Rated power
- 125 hp
- Torque
- 437 lb·ft at 1,400 rpm
- Compression
- 17.5:1
- Cooling
- liquid-cooled inline
- Emissions
- Tier 3
- Notes
- 6-cylinder 24-valve. The 24-valve electronically-injected engine was used on the Maxxum 125 Pro/Multicontroller model.
Transmissions
Transmissions for the CaseIH Maxxum 125| Synchroshiftmechanical shuttle | 12F / 12R |
|---|
| 24-speed partial power shiftpartial power shift | 24F / 24R |
|---|
| AutoShiftpartial power shift | 16F / 16R |
|---|
| Econopartial power shift | 17F / 16R |
|---|
Transmission notes
Synchroshift: Four gears (1-4) in three ranges (I-III).
24-speed partial power shift: The 24-speed transmission adds a high-low power shift to the base Synchroshift 12-speed transmission.
AutoShift: Four power shift gears in four ranges. Autoshift provides automatic shifting to maintain engine load.
Econo: The Econo transmission provides an overdrive 17th gear for transport speeds.
Weight
Weight specifications| Weight | 11,365 lb operating |
|---|
| Shipping | 9,466 lb |
|---|
Dimensions
Dimensions specifications| Wheelbase | 104.4 in |
|---|
| Length | 178.4 in |
|---|
| Width | 75.3 in |
|---|
Capacities
Capacities specifications| Fuel tank | 66 gal |
|---|
Hydraulics
Hydraulics specifications| System | open center |
|---|
| Pump flow | 16.6 gpm |
|---|
| Total flow | 27.1 gpm |
|---|
| Steering flow | 10.5 gpm |
|---|
| Remote valves | 2 to 4 |
|---|
Hitch
Hitch specifications| Rear hitch category | 2/3N |
|---|
| Control | mechanical draft control |
|---|
| Rear lift capacity | 7,509 lb |
|---|
| Front hitch category | II |
|---|
| Front lift capacity | 8,157 lb |
|---|
PTO
PTO specifications| Rear PTO | independent |
|---|
| Rear PTO speeds | 540/1000 (1.375) |
|---|
| Front PTO | independent |
|---|
| Front PTO speeds | 1000 |
|---|
| Engine rpm at PTO speed | 540@1969 |
|---|
Chassis
Chassis specifications| Drive | 2WD/4WD |
|---|
| Steering | Power steering |
|---|
| Brakes | Hydraulic wet disc brakes |
|---|
| Cab | Two post ROPS. Cab optional. Deluxe cab standard on 125 PRO model |
|---|
Tires
Tires specifications| Front | 11.00-16 |
|---|
| Rear | 18.4R38 (2WD) |
|---|
Electrical
Electrical specifications| System voltage | 12 V |
|---|
| Cold cranking | 960 CCA |
|---|
| Charging | alternator |
|---|
| Charging output | 120 A |
|---|
| Ground | negative |
|---|
Production
Production specifications| Price new | $97,541 (2011) |
|---|
| Factories | Basildon, England |
|---|
| Built by | CaseIH (a part of CNH) |
|---|