All 96 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production
Manufacturer
John Deere
(no label)
Row-Crop tractor
Factories
Waterloo, Iowa, USA
Factories
Mannheim, Baden-Württemberg, Germany
Original price
$135,731 (2010)
(no label)
The John Deere 7530 was introduced in 2007 but not available in the United States until 2009.
Engine
(no label)
John Deere 6.8L 6-cyl diesel
Fuel tank
92.5 gal | 350.1 L
Transmission
(no label)
16-speed partial power shift
(no label)
20-speed partial power shift
(no label)
infinitely variable transmission
Power
Engine (gross)
180 hp | 134.2 kW
PTO (claimed)
153 hp | 114.1 kW
Drawbar (tested)
142.8 hp | 106.5 kW
PTO (tested)
175.8 hp | 131.1 kW
Mechanical
(no label)
Four-wheel drive
Steering
hydrostatic power
(no label)
Differential hydraulic wet disc brakes
(no label)
ComfordGard cab standard. Optional Deluxe, Premium, and Premium Plus option packages add radio, automatic temperature control and hydraulic suspension.
Hydraulics
Type
closed center, pressure and flow compensated
Pressure
3135 psi | 216.2 bar
Valves
2 to 4
Pump flow
29 gpm | 109.8 lpm
Hitch
Rear Type
III
Rear lift (at 24"/610mm)
10,600 lbs | 4808 kg
Pto
Rear PTO
independent
Rear PTO Type
540/1000
Rear PTO Type
540/540E/1000 (optional)
Rear PTO Type
540E/1000/1000E (optional)
Front PTO
independent
Front PTO Type
1000 (optional)
Dimensions
Wheelbase
105.7 inches | 268 cm
Weight
14,600 lbs | 6622 kg
Front tire
16.9R28
Rear tire
18.4R42
Electrical
Ground
negative
Charging system
alternator
Battery volts
12
Engine
Engine detail
(no label)
John Deere 6068HRW77
(no label)
turbocharged intercooled diesel
(no label)
6-cylinder 24-valve
(no label)
liquid-cooled
Displacement
414.4 ci | 6.8 L
Bore/Stroke
4.19x5.00 inches | 106 x 127 mm
Rated Power (gross)
180 hp | 134.2 kW
Air cleaner
dual paper elements
Compression
17.0:1
Rated RPM
2100
Idle RPM
850-2250
Operating RPM
1300-2100
Torque
642 lb-ft | 870.6 Nm
Torque RPM
1600
Firing order
1-5-3-6-2-4
Starter volts
12
Starter power
4 hp | 3.0 kW
Oil capacity
20.8 qts | 19.7 L
Coolant capacity (Coolant)
37.6 qts | 35.6 L
Intake valve clearance
0.014 inches | 0.356 mm
Exhaust valve clearance
0.018 inches | 0.457 mm
Transmission
Transmission options
(no label)
16-speed partial power shift
(no label)
20-speed partial power shift
(no label)
infinitely variable transmission
Transmission
Transmission
PowrQuad Plus
Type
partial power shift
Gears
16 forward and reverse
Oil capacity
59.2 qts | 56.0 L
(no label)
Four ranges, each with four gears. Operated via range shift lever with gear shift buttons plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.
Transmission
AutoQuad Plus
Type
partial power shift
Gears
20 forward and reverse
Oil capacity
59.2 qts | 56.0 L
(no label)
Five ranges, each with four gears. Operated via range shift lever with gear shift buttons plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change. Automatic mode allows for computer-controlled automatic shifting to match load.
Transmission
John Deere IVT
Type
infinitely variable transmission
Gears
infinite forward and reverse
Oil capacity
59.2 qts | 56.0 L
(no label)
The IVT is operated with a right-hand speed control lever and left-hand reverser lever. The speed control lever is used to select speed in one of two ranges. A dial on the lever sets the maximum speed for the range. If a maximum speed of 2 kph or less is selected then the transmission will shift into creeper mode with a minimum speed of 0.05 kph.