All 118 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production
Manufacturer
John Deere
(no label)
Row-Crop tractor
Factories
Waterloo, Iowa, USA
Factories
Mannheim, Baden-Württemberg, Germany
Original price
$77,688 (2011)
(no label)
In the spring of 2011, production of the 7330 was moved from Waterloo to Mannheim. The 110-inch rear axle option was dropped at that time. The 7330 was available with ROPS or a basic cab. Upgraded hydraulics and hitch were optional with ROPS but upgraded systems with a cab were only available on the 7330 Premium.
Engine
(no label)
John Deere 6.8L 6-cyl diesel
Transmission
(no label)
16-speed partial power shift
(no label)
20-speed partial power shift
(no label)
32-speed partial power shift
Power
Engine (gross)
150 hp | 111.9 kW
PTO (claimed)
125 hp | 93.2 kW
Mechanical
Drive
4x2 2WD
Drive
4x4 MFWD 4WD (optional)
Steering
hydrostatic power
(no label)
Differential hydraulic wet disc brakes
(no label)
Two-post Roll-Gard ROPS. Cab optional.
Capacity
Fuel
66 gal | 249.8 L
Hydraulic system
13.7 gal | 51.9 L
Front axle
8.8 qts | 8.3 L
Front hubs
1.6 qts | 1.5 L
Hydraulics
Type
constant flow load sensing
Type
closed-center load sensing (optional ROPS)
Capacity
13.7 gal | 51.9 L
Pressure
2900 psi | 200.0 bar
Valves
2 to 4
Pump flow
21.1 gpm | 79.9 lpm
Pump flow
29 gpm (optional ROPS) | 109.8 lpm
Hitch
Rear Type
II
Rear Type
3N/2
Control
position control
Control
electronic lower-link (optional ROPS)
Rear lift (at 24"/610mm)
8,800 lbs (II) | 3991 kg
Rear lift (at 24"/610mm)
8,200 lbs (3N/2) | 3719 kg
Pto
Rear PTO
independent
Rear PTO Type
540/1000
Engine RPM
540@1995
Engine RPM
1000@1995
Dimensions
Wheelbase
104.3 inches | 264 cm
Weight
10800 to 12965 pounds
Front tire
10.00-16
Rear tire
18.4R38 (2WD)
Serial location
(no label)
Right side of main frame above front axle.
Electrical
Ground
negative
Charging system
alternator
Charging volts
14
Battery volts
12
Engine
Engine detail
(no label)
John Deere 6068HRW74
(no label)
turbocharged intercooled diesel
(no label)
6-cylinder 12-valve
(no label)
liquid-cooled
Displacement
414.4 ci | 6.8 L
Bore/Stroke
4.19x5.00 inches | 106 x 127 mm
Rated Power (gross)
150 hp | 111.9 kW
Air cleaner
dual paper elements
Compression
17.0:1
Rated RPM
2100
Idle RPM
850-2250
Operating RPM
1500-2100
Torque
507 lb-ft | 687.5 Nm
Torque RPM
1500
Firing order
1-5-3-6-2-4
Oil capacity
20.8 qts | 19.7 L
Coolant capacity (Coolant)
32.8 qts (ROPS) | 31.0 L
Coolant capacity (Coolant)
35.6 qts (cab) | 33.7 L
Intake valve clearance
0.014 inches | 0.356 mm
Exhaust valve clearance
0.018 inches | 0.457 mm
Transmission
Transmission options
(no label)
16-speed partial power shift
(no label)
20-speed partial power shift
(no label)
32-speed partial power shift
Transmission
Transmission
John Deere PowrQuad
Type
partial power shift
Gears
16 forward and reverse
Oil capacity
54.8 qts | 51.9 L
(no label)
Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.
Transmission
John Deere PowrQuad
Type
partial power shift
Gears
20 forward and reverse
Oil capacity
54.8 qts | 51.9 L
(no label)
Five ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.
Transmission
John Deere PowrQuad Plus
Type
partial power shift
Gears
20 forward and reverse
Oil capacity
54.8 qts | 51.9 L
(no label)
PowrQuad Plus is standard on tractors with cab, replacing the separate gear shift lever with a push-button gear shift on the range lever. Available in 16- or 20-speed. Clutch must be used to change range, cluthless push-button power shift for speeds.
Transmission
John Deere PowrQuad Creeper
Type
partial power shift
Gears
32 forward and reverse
Oil capacity
56 qts | 53.0 L
(no label)
Optional creeper could be added to both the 16- and 20-speed PowrQuad. Creeper is engaged with a separate shift lever that selects between creeper (turtle) and the standard transmission ratio (rabbit). Tractor must be stopped, clutch used, and engine speed below 1000 RPMs to shift in or out of the creeper.
Dimensions
Tires
Standard tires (ag)
Front: 10.00-16. Rear: 18.4R38 (2WD)
Standard tires (ag)
Front: 14.9R28. Rear: 18.4R38 (4WD)
Dimensions
Wheelbase
104.3 inches | 264 cm
Length
187.3 inches | 475 cm
Width
65.5 inches (flange axle) | 166 cm
Clearance (front axle)
21.6 inches (2WD) | 54 cm
Clearance (front axle)
23 inches (4WD) | 58 cm
Clearance (rear axle)
28.2 inches | 71 cm
Clearance (drawbar)
19 inches | 48 cm
Rear axle
60 inch length (flange) | 1524 mm
Rear axle
3.385 by 96 inches (optional bar) | 85 by 2438 mm
Rear axle
3.385 by 110.5 inches (optional long bar) | 85 by 2806 mm
Front tread
77 to 101 inches (2WD) | 195 to 256 cm
Rear tread
60 to 100.3 inches (flange cast) | 152 to 254 cm
Rear tread
63.1 to 108.3 inches (flange steel) | 160 to 275 cm