All 63 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production
Manufacturer
Steiger
(no label)
Four-wheel Drive (4WD) tractor
(no label)
Built in Fargo, North Dakota, USA
Engine
(no label)
Cummins 18.8L 6-cyl diesel
Transmission
(no label)
6-speed full power shift with torque converter
Power
Engine
470 hp | 350.5 kW
Drawbar (tested)
369.76 hp | 275.7 kW
Mechanical
(no label)
Four-wheel drive
Final drives
planetary
(no label)
Articulated power steering
(no label)
Hydraulic disc brakes
(no label)
Safari Cab standard with air-conditioning.
Capacity
Fuel
385 gal | 1457.2 L
Hydraulic system
48 gal | 181.7 L
Hydraulics
Type
open center
Capacity
48 gal | 181.7 L
Pressure
2250 psi | 155.1 bar
Valves
5
Pump flow
38 gpm | 143.8 lpm
SCV flow
25 gpm | 94.6 lpm
Dimensions
Wheelbase
150 inches | 381 cm
Weight
45360 lbs | 20575 kg
Front tire
30.5x32
Rear tire
30.5x32
Electrical
Ground
negative
Charging system
alternator
Charging amps
90
Batteries
4
Battery CCA
625
Battery volts
12
Engine
Engine detail
(no label)
Cummins KTA-1150
(no label)
turbocharged diesel
(no label)
6-cylinder
(no label)
liquid-cooled inline
(no label)
The 470 horsepower Cummins engine was available in early versions of the Steiger Tiger III. Later, this version became the ST-470 when the 450 horsepower Caterpillar engine became an option.
Displacement
1150 ci | 18.8 L
Bore/Stroke
6.25x6.25 inches | 159 x 159 mm
Power
470 hp | 350.5 kW
Compression
15.5:1
Rated RPM
1700
Idle RPM
650-2350
Torque
1580 lb-ft | 2142.5 Nm
Torque RPM
1500
Starter volts
24
Oil capacity
76 qts | 71.9 L
Coolant capacity (Coolant)
112 qts | 106.0 L
Transmission
Transmission
Transmission
Allison CLT 5965
Type
full power shift with torque converter
Gears
6 forward and 1 reverse
(no label)
Power shift six-speed transmission with locking torque converter. Torque converter automatically locks when transmission side reaches 1700 RPM.