Steiger Panther III PTA-296: all source data
All 26 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | Steiger |
|---|
| (no label) | Four-wheel Drive (4WD) tractor |
|---|
| (no label) | Built in Fargo, North Dakota, USA |
|---|
Engine| (no label) | Cummins 14.8L 8-cyl diesel |
|---|
Transmission| (no label) | 8-speed power shift with torque converter |
|---|
Power| Engine | 296 hp | 220.7 kW |
|---|
Mechanical| (no label) | Four-wheel drive |
|---|
| (no label) | Articulated power steering |
|---|
| (no label) | Safari Cab standard with air-conditioning. |
|---|
Hydraulics| Type | open center load sensing |
|---|
| Valves | 4 |
|---|
Pto| Rear PTO | independent |
|---|
| Rear PTO Type | 540/1000 |
|---|
Engine
Engine detail| (no label) | Cummins V-903 |
|---|
| (no label) | diesel |
|---|
| (no label) | 8-cylinder |
|---|
| (no label) | liquid-cooled |
|---|
| Displacement | 903 ci | 14.8 L |
|---|
| Bore/Stroke | 5.50x4.75 inches | 140 x 121 mm |
|---|
| Power | 296 hp | 220.7 kW |
|---|
| Rated RPM | 2600 |
|---|
| Starter volts | 12 |
|---|
Transmission
Transmission| Transmission | Allison HT-740 |
|---|
| Type | power shift with torque converter |
|---|
| Gears | 8 forward and 2 reverse |
|---|
| (no label) | Four gears, plus reverse, with two-speed transfer case. Automatic torque converter lock-up. |
|---|