New Holland Workmaster 25S: all source data

All 61 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
DistributorNew Holland (a part of CNH)
ManufacturerLS
(no label)Sub-Compact Utility tractor
(no label)Built in South Korea
Engine
(no label)Yanmar 1.3L 3-cyl diesel
Fuel tank6.6 gal | 25.0 L
Transmission
(no label)hydrostatic
Power
Engine (gross)24.7 hp | 18.4 kW
PTO (claimed)17.2 hp | 12.8 kW
Mechanical
(no label)Four-wheel drive
Differential lockmechanical rear
(no label)Power steering
(no label)Wet disc brakes
(no label)Two-post folding ROPS.
Hydraulics
Typeopen center
Valves1
Pump flow4.6 gpm | 17.4 lpm
Total flow6.7 gpm | 25.4 lpm
Steering flow2.1 gpm | 7.9 lpm
Hitch
Rear TypeI
Rear lift (at ends)992 lbs | 449 kg
Rear lift (at 24"/610mm)728 lbs | 330 kg
Pto
Rear PTOindependent
Clutchelectro-hydraulic
Rear PTO Type540 (1.375)
Mid PTOindependent
Mid PTO Type2500
Dimensions
Wheelbase56.1 inches | 142 cm
Weight1444 lbs | 654 kg
Electrical
Groundnegative
Charging systemalternator
Charging amps40
Battery CCA430
Battery volts12
Battery AH45

Engine

Engine detail
(no label)Yanmar 3TNV80F
(no label)diesel
(no label)3-cylinder
(no label)liquid-cooled
Displacement77.2 ci | 1.3 L
Bore/Stroke3.15x3.30 inches | 80 x 84 mm
EmissionsTier IV
Power (gross)24.7 hp | 18.4 kW
Pre-heatingglow plugs
Rated RPM3000
Starterelectric
Starter volts12

Transmission

Transmission
Typehydrostatic
Gearsinfinite forward and reverse (2-range)

Dimensions

Tires
Lawn/turf front18x8.50-10
Lawn/turf rear26x12.00-12
Industrial front18x8.50-10
Industrial rear26x12.00-12
Dimensions
Wheelbase56.1 inches | 142 cm
Length97.4 inches | 247 cm
Width46.7 inches | 118 cm
Height (ROPS)87.4 inches | 221 cm
Weight1444 lbs | 654 kg
(no label)Flange rear axle
Front tread36.1 inches | 91 cm
Rear tread34.6 inches | 87 cm