New Holland 8160
Production ended · 2WD
PTO power · claimed
90 hp
- Weight
- 11,616 lb
- Engines
- 1 Diesel
- Built
- no record
- Price new
- no record
Power
| Engine | no record |
|---|---|
| PTO | 90 hp claimed |
| Drawbar | no record |
| Listed power | 100 hp PTO basis |
Engines
| New Holland 7.5L 6-cyl dieselDiesel · 6 cyl | 456 ci |
|---|
Engine details
- New Holland 7.5L 6-cyl diesel
- Bore × stroke
- 4.5 in × 5 in
- Rated speed
- 2,200 rpm
- Compression
- 17.5:1
- Cooling
- liquid-cooled
- Firing order
- 1-5-3-6-2-4
Transmissions
| Dual Commandpartially synchronized | 23F / 12R |
|---|---|
| Range Commandpartial power shift | 17F / 6R |
| Range Commandpartial power shift | 18F / 6R |
Transmission notes
Dual Command: Four gears (1-4) in three ranges (A-C) with left-hand shuttle lever and push-button underdrive. Gear shifts may be made on the move with the clutch. The tractor must be stopped to shift range. The forward-reverse shuttle, and the push-button underdrive, may be performed on the move without the clutch. Reverse gears operate in underdrive only. Optional creeper doubles the available speeds to 46 forward and 24 reverse.
Range Command: The 17-speed Range Command transmission was available with 2WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 30 forward and 12 in reverse.
Range Command: The 18-speed Range Command transmission was available with 4WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 31 and 12.
Weight
| Weight | 11,616 lb shipping |
|---|---|
| Shipping | 11,616 lb |
Dimensions
| Wheelbase | 108.3 in |
|---|---|
| Length | 180 in |
| Width | 84 in |
| Height | 114.5 in unspecified |
| Front axle clearance | 23.1 in |
| Front tread, narrowest | 60.7 in |
| Front tread, widest | 86.1 in |
| Rear tread, narrowest | 60.2 in |
| Rear tread, widest | 87.9 in |
Capacities
| Fuel tank | 85 gal |
|---|---|
| Hydraulic system | 23.7 gal |
Hydraulics
| System | closed center load sensing |
|---|---|
| Pump flow | 26 gpm |
| Steering flow | 15.6 gpm |
| Pressure | 2,755 psi |
| Steering pressure | 2,465 psi |
| Remote valves | 2 to 4 |
Hitch
| Rear hitch category | II |
|---|---|
| Rear lift capacity | no record |
| Rear lift at 24 in (610 mm) | 8,500 lb |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO speeds | 540/1000 |
Chassis
| Drive | 2WD |
|---|---|
| Steering | hydrostatic power |
| Brakes | Differential hydraulic wet disc brakes |
| Differential lock | Rear or front and rear (4WD) with push-button operation. Manual and automatic modes. (2WD) |
| Cab | Two-post ROPS. Optional cab |
Tires
| Front | 11.00-16 |
|---|---|
| Rear | 18.4R38 (2WD) |
Electrical
| System voltage | 12 V |
|---|---|
| Batteries | 2 |
| Cold cranking | 900 CCA |
| Charging | alternator |
| Charging output | 70 A |
| Ground | negative |
Production
| Factories | England |
|---|---|
| Built by | New Holland |
Variants
- M100 similar Fiat model
Literature
- 60 Series Gemini 90 to 130 PTO hp Tractors New Holland, 1996
- Operator's Manual Tractors 8160, 8260, 8360 and 8560 (42816040) 1995
- North American Buyer's Guide New Holland, 1997