All 89 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production
Manufacturer
Massey Ferguson (a part of AGCO)
(no label)
Row-Crop tractor
(no label)
Built in Beauvais, France
(no label)
Original price was $215,339 in 2009
Engine
(no label)
AGCO SISU POWER 8.4L 6-cyl diesel
Fuel tank
155.9 gal (SCR) | 590.1 L
Fuel tank
182.3 gal (IEGR) | 690.0 L
Exhaust fluid (DEF)
8 gal | 30.3 L
Transmission
(no label)
continuously-variable transmission (CVT)
Power
Engine
290 hp | 216.3 kW
Engine (max)
320 hp | 238.6 kW
PTO (claimed)
250 hp | 186.4 kW
Drawbar (tested)
218.5 hp | 162.9 kW
PTO (tested)
290.3 hp | 216.5 kW
Mechanical
(no label)
Four-wheel drive
Final drives
inboard planetary
Differential lock
electro-hydraulic
(no label)
Power steering
(no label)
Hydraulic wet disc brakes
Trailer brakes
hydraulic
Trailer brakes
pneumatic
(no label)
Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control.
Hydraulics
Type
closed center load sensing
Pressure
2,901 psi | 200.0 bar
Valves
4 to 6
Pump flow
26.4 gpm | 99.9 lpm
Total flow
46.2 gpm | 174.9 lpm
Hitch
Rear Type
III, IV
Rear lift (at ends)
26,460 lbs | 12002 kg
Rear lift (at 24"/610mm)
21,336 lbs | 9678 kg
Front Hitch
III
Front lift (at ends)
11,020 lbs | 4998 kg
Drawbar
Cat. 3
Drawbar
Cat. 3 Heavy Duty (optional)
Drawbar
Cat IV (optional)
Pto
Rear PTO
independent
Clutch
electro-hydraulic
Rear PTO Type
1000E/1000 (1.75)
Rear PTO Type
540E/1000 (1.375)
Engine RPM
1000@1970
Engine RPM
1000E@1605
Front PTO
independent
Front PTO Type
1000 (1.375)
Dimensions
Wheelbase
122.2 inches | 310 cm
Weight
24,250 lbs | 10999 kg
Front tire
420/85R34
Rear tire
480/80R50
Electrical
Ground
negative
Charging system
alternator
Charging amps
240
Batteries
2
Battery CCA
775
Battery volts
12
Engine
Engine detail
(no label)
AGCO SISU POWER 84CTA
(no label)
turbocharged intercooled diesel
(no label)
6-cylinder
(no label)
liquid-cooled
(no label)
The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. Engine optionally available with exhaust gas recirculation instead of SCR.