Lanz 700: all source data

All 55 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
ManufacturerLanz (a part of John Deere)
(no label)Built in Mannheim, Baden-Württemberg, Germany
Engine
(no label)John Deere 2.7L 4-cyl diesel
Fuel tank18.5 gal | 70.0 L
Transmission
(no label)10-speed constant mesh
Power
Engine53 hp | 39.5 kW
Mechanical
(no label)Two-wheel drive
(no label)Manual steering
(no label)Disc brakes
(no label)Open operator station.
Hydraulics
Typeopen center
Pressure2200 psi | 151.7 bar
Pump flow4.2 gpm | 15.9 lpm
Hitch
Rear TypeII
Rear lift1764 lbs | 800 kg
Pto
Rear PTO Type540/1000
Engine RPM540@2250
Engine RPM1000@2380
Mid PTOstandard
Mid PTO Type1000
Dimensions
Wheelbase76.8 inches | 195 cm
Weight4775 lbs | 2165 kg
Front tire6.00-16
Rear tire11-32
Serial location
(no label)Serial number plate on the right side of the tractor frame, above the front axle.

Engine

Engine detail
(no label)John Deere
(no label)diesel
(no label)4-cylinder
(no label)liquid-cooled
Displacement165.1 ci | 2.7 L
Bore/Stroke3.875x3.50 inches | 98 x 89 mm
Power53 hp | 39.5 kW
Rated RPM2400
Firing order1-3-4-2
Starter volts12
Oil capacity5.8 qts | 5.5 L
Coolant capacity (Coolant)12.15 qts | 11.5 L

Transmission

Transmission
Typeconstant mesh
Gears10 forward and 3 reverse
Oil capacity32.8 qts | 31.0 L
(no label)Four gears (1-4) in three ranges (I, II, III) plus reverse range. Speeds in fourth gear are the same across all three forward ranges.

Dimensions

Tires
Ag front6.00-16
Ag rear11-32
Ag rear9-32
Ag rear11-28
Ag rear9-36
Ag rear13-28
Dimensions
Wheelbase76.8 inches | 195 cm
Length133.5 inches | 339 cm
Width65 inches | 165 cm
Height (steering wheel)62.6 inches | 159 cm
Height (hood)54.9 inches | 139 cm
Shipping weight4775 lbs | 2165 kg
Front tread49.2 to 72.8 inches | 124 to 184 cm
Rear tread53.2 to 59.1 inches | 135 to 150 cm