John Deere 7230: all source data

All 144 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
Manufacturer	John Deere
(no label)	Row-Crop tractor
(no label)	Built in Mannheim, Baden-Württemberg, Germany
(no label)	Original price was $69,616 in 2011
(no label)	The basic 7230 was available with ROPS or a basic cab. Upgraded hydraulics and hitch were optional with ROPS. Upgraded systems with a cab were only available on the 7230 Premium model.

Engine
(no label)	John Deere 6.8L 6-cyl diesel

Mechanical
(no label)	Two- or four-wheel drive
(no label)	Power steering
(no label)	Differential hydraulic wet disc brakes
(no label)	Two-post Roll-Gard ROPS. Cab optional.

Hydraulics
Type	constant flow load sensing
Type	closed-center load sensing (optional ROPS)
Capacity	13.7 gal \| 51.9 L
Pressure	2900 psi \| 200.0 bar
Valves	2 to 4
Pump flow	21.1 gpm \| 79.9 lpm
Pump flow	29 gpm \| 109.8 lpm

Hitch
Rear Type	II
Control	position control
Control	electronic lower-link (optional ROPS)
Rear lift (at 24"/610mm)	5,915 lbs \| 2683 kg

Serial location
(no label)	Right side of main frame above front axle

Engine detail
(no label)	John Deere 6068HL280
(no label)	turbocharged diesel
(no label)	6-cylinder 12-valve
(no label)	liquid-cooled
Displacement	414.4 ci \| 6.8 L
Bore/Stroke	4.19x5.00 inches \| 106 x 127 mm
Power	135 hp \| 100.7 kW
Air cleaner	dual paper elements
Rated RPM	2300
Idle RPM	850-2460
Operating RPM	1500-2300
Torque	389 lb-ft \| 527.5 Nm
Torque RPM	1500
Firing order	1-5-3-6-2-4
Starter volts	12
Starter power	4 hp \| 3.0 kW
Oil capacity	20.8 qts \| 19.7 L
ROPS Coolant capacity (ROPS Coolant)	32.8 qts \| 31.0 L
Cab Coolant capacity (Cab Coolant)	35.6 qts \| 33.7 L
Intake valve clearance	0.014 inches \| 0.356 mm
Exhaust valve clearance	0.018 inches \| 0.457 mm
(no label)	John Deere 6068HL282
(no label)	turbocharged diesel
(no label)	6-cylinder 12-valve
(no label)	liquid-cooled
Displacement	414.4 ci \| 6.8 L
Bore/Stroke	4.19x5.00 inches \| 106 x 127 mm
Rated Power (gross)	135 hp \| 100.7 kW
Air cleaner	dual paper elements
Rated RPM	2300
Idle RPM	850-2460
Operating RPM	1500-2300
Torque	399 lb-ft \| 541.0 Nm
Torque RPM	1500
Firing order	1-5-3-6-2-4
Starter volts	12
Starter power	4 hp \| 3.0 kW
Oil capacity	20.8 qts \| 19.7 L
Coolant capacity (Coolant)	32.8 qts (ROPS) \| 31.0 L
Coolant capacity (Coolant)	35.6 qts (cab) \| 33.7 L
Intake valve clearance	0.014 inches \| 0.356 mm
Exhaust valve clearance	0.018 inches \| 0.457 mm

Transmission
Transmission	John Deere SyncroPlus
Type	full synchro shift
Gears	12 forward and 4 reverse
Oil capacity	54.8 qts \| 51.9 L
(no label)	Four ranges, each with four forward gears and reverse operated via a range shift lever and gear shift lever. Cluch must be used to change range or gear. Only avaialable with ROPS.
Transmission	John Deere SyncroPlus PowrReverser
Type	full synchro shift
Gears	16 forward and reverse
Oil capacity	54.8 qts \| 51.9 L
(no label)	Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range or gear.
Transmission	John Deere PowrQuad
Type	partial power shift
Gears	16 forward and reverse
Oil capacity	54.8 qts \| 51.9 L
(no label)	Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.
Transmission	John Deere PowrQuad
Type	partial power shift
Gears	24 forward and reverse
Oil capacity	54.8 qts \| 51.9 L
(no label)	Six ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.

Tires
2WD Standard tires (ag) (2WD)	Front: 10.00-16. Rear: 18.4R38
4WD Standard tires (ag) (4WD)	Front: 14.9R24. Rear: 18.4R38