All 144 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production
Manufacturer
John Deere
(no label)
Row-Crop tractor
(no label)
Built in Mannheim, Baden-Württemberg, Germany
(no label)
The basic Deere 7130 was available a basic cab or open-operator station with ROPS. Upgraded hydraulics and hitch were optional on open-operator station models. Upgraded systems with a cab were only available on the 7130 Premium.
Engine
(no label)
John Deere 6.8L 6-cyl diesel
(no label)
John Deere 4.5L 4-cyl diesel
Transmission
(no label)
12-speed full synchro shift
(no label)
16-speed full synchro shift
(no label)
16-speed partial power shift
(no label)
24-speed partial power shift
Power
Engine (gross)
125 hp | 93.2 kW
PTO (claimed)
100 hp | 74.6 kW
Mechanical
Drive
4x2 2WD
Drive
4x4 MFWD 4WD (optional)
Steering
hydrostatic power
(no label)
Differential hydraulic wet disc brakes
(no label)
Two-post Roll-Gard ROPS. Cab optional.
Capacity
Fuel
54.7 gal | 207.0 L
Fuel
66 gal (optional) | 249.8 L
Hydraulic system
13.7 gal | 51.9 L
Hydraulic system
15.9 gal | 60.2 L
Front axle
8.8 qts | 8.3 L
Front hubs
1.6 qts | 1.5 L
Hydraulics
Type
constant flow load sensing
Type
closed-center load sensing (optional with ROPS)
Capacity
13.7 gal | 51.9 L
Capacity
15.9 gal | 60.2 L
Pressure
2900 psi | 200.0 bar
Valves
1 to 4
Pump flow
21.1 gpm | 79.9 lpm
Pump flow
29 gpm (optional with ROPS) | 109.8 lpm
Hitch
Rear Type
II
Control
position control
Control
electronic lower-link (optional with ROPS)
Rear lift (at 24"/610mm)
5,915 lbs | 2683 kg
Pto
Rear PTO
independent
Rear PTO Type
540/1000
Dimensions
Wheelbase
106.3 inches (2WD) | 270 cm
Wheelbase
104.3 inches | 264 cm
Weight
9657 to 12340 pounds
Front tire
10.00-16
Rear tire
18.4R38 (2WD)
Serial location
(no label)
Right side of main frame above front axle
Electrical
Ground
negative
Charging system
alternator
Charging amps
90
Battery volts
12
Engine
Engine options
(no label)
John Deere 6.8L 6-cyl diesel
(no label)
John Deere 4.5L 4-cyl diesel
Engine detail
(no label)
John Deere 6068HL280
(no label)
turbocharged diesel
(no label)
6-cylinder 12-valve
(no label)
liquid-cooled
Displacement
414.4 ci | 6.8 L
Bore/Stroke
4.19x5.00 inches | 106 x 127 mm
Emissions
Tier III
Rated Power (gross)
121 hp | 90.2 kW
Air cleaner
dual paper elements
Rated RPM
2300
Idle RPM
850-2460
Operating RPM
1600-2300
Torque
358 lb-ft | 485.4 Nm
Torque RPM
1500
Firing order
1-5-3-6-2-4
Starter volts
12
Starter power
4 hp | 3.0 kW
Oil capacity
20.8 qts | 19.7 L
Intake valve clearance
0.014 inches | 0.356 mm
Exhaust valve clearance
0.018 inches | 0.457 mm
(no label)
John Deere PowerTech E 4045HL288
(no label)
turbocharged diesel
(no label)
4-cylinder 8-valve
(no label)
liquid-cooled
(no label)
The Deere 7130 switched to a four-cylinder engine with the 2010 model year.
Displacement
276 ci | 4.5 L
Bore/Stroke
4.19x5.00 inches | 106 x 127 mm
Emissions
Tier III
Rated Power (gross)
125 hp | 93.2 kW
Fuel system
high-pressure common rail
Air cleaner
dual paper elements
Compression
19:1
Rated RPM
2300
Idle RPM
850-2460
Operating RPM
1600-2300
Torque
372 lb-ft | 504.4 Nm
Torque RPM
1600
Firing order
1-3-4-2
Starter volts
12
Starter power
4 hp | 3.0 kW
Oil capacity
16.8 qts | 15.9 L
Intake valve clearance
0.014 inches | 0.356 mm
Exhaust valve clearance
0.018 inches | 0.457 mm
Transmission
Transmission options
(no label)
12-speed full synchro shift
(no label)
16-speed full synchro shift
(no label)
16-speed partial power shift
(no label)
24-speed partial power shift
Transmission
Transmission
John Deere SyncroPlus
Type
full synchro shift
Gears
12 forward and 4 reverse
Oil capacity
54.8 qts | 51.9 L
(no label)
Four ranges, each with four forward gears and reverse operated via a range shift lever and gear shift lever. Cluch must be used to change range or gear. Only avaialable with ROPS.
Transmission
John Deere SyncroPlus PowrReverser
Type
full synchro shift
Gears
16 forward and reverse
Oil capacity
54.8 qts | 51.9 L
(no label)
Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range or gear.
Transmission
John Deere PowrQuad
Type
partial power shift
Gears
16 forward and reverse
Oil capacity
54.8 qts | 51.9 L
(no label)
Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.
Transmission
John Deere PowrQuad
Type
partial power shift
Gears
24 forward and reverse
Oil capacity
54.8 qts | 51.9 L
(no label)
Six ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change.
Dimensions
Tires
Standard tires (ag)
Front: 10.00-16. Rear: 18.4R38 (2WD)
Standard tires (ag)
Front: 14.9R24. Rear: 18.4R38 (4WD)
Dimensions
Wheelbase
106.3 inches (2WD) | 270 cm
Wheelbase
104.3 inches | 264 cm
Length
187.3 inches | 475 cm
Width
65.5 inches (flange axle ends) | 166 cm
Clearance (front axle)
21.6 inches (2WD) | 54 cm
Clearance (front axle)
23 inches (4WD) | 58 cm
Clearance (rear axle)
28.2 inches | 71 cm
Clearance (drawbar)
19 inches | 48 cm
Rear axle
65.5 inch length (flange) | 1663 mm
Rear axle
3.1 by 100.6 inches (optional bar) | 78 by 2555 mm