John Deere 710: all source data
All 42 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | John Deere |
|---|
| (no label) | Utility tractor |
|---|
| (no label) | Built in Mannheim, Baden-Württemberg, Germany |
|---|
Engine| (no label) | John Deere 3.3L 4-cyl diesel |
|---|
| Fuel tank | 18.5 gal | 70.0 L |
|---|
Transmission| (no label) | 10-speed |
|---|
Power| Engine | 50 hp | 37.3 kW |
|---|
Mechanical| (no label) | Two-wheel drive |
|---|
| (no label) | Open operator station. |
|---|
Hydraulics| Pump flow | 4.2 gpm | 15.9 lpm |
|---|
| Pump flow | 8.5 gpm (power steering) | 32.2 lpm |
|---|
Hitch| Rear Type | II |
|---|
| Rear lift | 3859 lbs | 1750 kg |
|---|
Pto| Rear PTO | live (2-stage clutch) |
|---|
| Rear PTO Type | 540/1000 |
|---|
| Engine RPM | 540@2250 |
|---|
| Engine RPM | 1000@2380 |
|---|
| Front PTO Type | 1000 |
|---|
Dimensions| Weight | 5060 lbs | 2295 kg |
|---|
| Front tire | 6.50-16 |
|---|
| Rear tire | 16.9-30 |
|---|
Engine
Engine detail| (no label) | John Deere 202D23L |
|---|
| (no label) | diesel |
|---|
| (no label) | 4-cylinder |
|---|
| (no label) | liquid-cooled |
|---|
| (no label) | Wet-sleeved engine built in France. |
|---|
| Displacement | 202.6 ci | 3.3 L |
|---|
| Bore/Stroke | 3.858x4.33 inches | 98 x 110 mm |
|---|
| Power | 50 hp | 37.3 kW |
|---|
| Rated RPM | 2400 |
|---|
| Idle RPM | 650-2400 |
|---|
| Operating RPM | 1500-2400 |
|---|
| Torque | 132 lb-ft | 179.0 Nm |
|---|
| Torque RPM | 1300 |
|---|
| Firing order | 1-3-4-2 |
|---|
Transmission
Transmission| Gears | 10 forward and 3 reverse |
|---|
| (no label) | Three gears (1-3) in three ranges (I-III), plus reverse (R) range with additional fourth road gear in range III. |
|---|
Dimensions
Tires| Ag front | 6.50-16 |
|---|
| Ag rear | 16.9-30 |
|---|
Dimensions| Length | 139 inches | 353 cm |
|---|
| Height | 94.5 inches | 240 cm |
|---|
| Weight | 5060 lbs | 2295 kg |
|---|