John Deere 6430: all source data

All 111 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
Manufacturer	John Deere
(no label)	Built in Mannheim, Baden-Württemberg, Germany

Engine
(no label)	John Deere 4.5L 4-cyl diesel

Transmission
(no label)	12-speed fully synchronized
(no label)	16-speed synchronized with power shuttle
(no label)	16-speed partial power shift
(no label)	24-speed partial power shift

Hydraulics
Type	open-center load sensing
Type	closed-center pressure-flow compensated (optional)
Capacity	13.7 gal \| 51.9 L
Pressure	2900 psi \| 200.0 bar
Valves	1 to 3
Total flow	21.1 gpm \| 79.9 lpm
Total flow	29 gpm (optional) \| 109.8 lpm

Hitch
Rear Type	II/III
Rear lift (at 24"/610mm)	4,450 lbs \| 2018 kg

Dimensions
Wheelbase	94.5 inches \| 240 cm
Weight	10,000 lbs \| 4536 kg

Serial location
(no label)	On the main tractor frame, right side, above the front axle.

Engine detail
(no label)	John Deere 4045HL281 PowerTech E
(no label)	turbocharged diesel
(no label)	4-cylinder 8-valve
(no label)	liquid-cooled vertical inline
(no label)	Original engine, used in the basic 6330 from 2007 through the 2009 model year.
Displacement	276 ci \| 4.5 L
Bore/Stroke	4.19x5.00 inches \| 106 x 127 mm
Emissions	Tier III
Rated Power (gross)	115 hp \| 85.8 kW
Air cleaner	dual dry element
Compression	19:1
Rated RPM	2300
Idle RPM	850-2460
Operating RPM	1500-2300
Torque	344 lb-ft \| 466.5 Nm
Torque RPM	1500
Firing order	1-3-4-2
Starter volts	12
Starter power	4.0 hp \| 3.0 kW
Oil capacity	16.8 qts \| 15.9 L
Coolant capacity (Coolant)	28 qts (ROPS) \| 26.5 L
Coolant capacity (Coolant)	30.8 qts (cab) \| 29.1 L
Intake valve clearance	0.014 inches \| 0.356 mm
Exhaust valve clearance	0.018 inches \| 0.457 mm
(no label)	John Deere 4045HL288 PowerTech E
(no label)	turbocharged diesel
(no label)	4-cylinder 8-valve
(no label)	liquid-cooled vertical inline
(no label)	Replacement engine, first used in the 2010 model year.
Displacement	276 ci \| 4.5 L
Bore/Stroke	4.19x5.00 inches \| 106 x 127 mm
Rated Power (gross)	120 hp \| 89.5 kW
Air cleaner	dual dry element
Compression	19:1
Rated RPM	2300
Idle RPM	850-2460
Operating RPM	1500-2300
Torque	356 lb-ft \| 482.7 Nm
Torque RPM	1600
Firing order	1-3-4-2
Oil capacity	16.8 qts \| 15.9 L
Coolant capacity (Coolant)	28 qts (ROPS) \| 26.5 L
Coolant capacity (Coolant)	30.8 qts (cab) \| 29.1 L
Intake valve clearance	0.014 inches \| 0.356 mm
Exhaust valve clearance	0.018 inches \| 0.457 mm

Transmission options
(no label)	12-speed fully synchronized
(no label)	16-speed synchronized with power shuttle
(no label)	16-speed partial power shift
(no label)	24-speed partial power shift

Transmission
Transmission	John Deere SyncroPlus
Type	fully synchronized
Gears	12 forward and 4 reverse
Oil capacity	54.8 qts \| 51.9 L
Transmission	John Deere PowrReverser
Type	synchronized with power shuttle
Gears	16 forward and reverse
Oil capacity	54.8 qts \| 51.9 L
Transmission	John Deere PowrQuad
Type	partial power shift
Gears	16 forward and reverse
Clutch	wet disc
Oil capacity	51.6 qts \| 48.8 L
Oil capacity	52.8 qts (PowrQuad Plus) \| 50.0 L
(no label)	Four gears (1-4) in four ranges (A-D) with left-hand reverser lever. Gear changes (1-4) and direction changes can be done while moving without the clutch. Clutch is required to shift range (A-D). Optional PowrQuad Plus adds push-button gear shifting.
Transmission	John Deere PowrQuad
Type	partial power shift
Gears	24 forward and reverse
Oil capacity	52.8 qts \| 50.0 L
(no label)	Four gears (1-4) in six ranges (A-E) with left-hand reverser lever. Gear changes (1-4) and direction changes can be done while moving without the clutch. Clutch is required to shift range (A-D). Optional PowrQuad Plus adds push-button gear shifting.