John Deere PowrReverserpartially synchronized with power shuttle
9F / 9R
Transmission notes
John Deere PowrReverser: Three gears (1-3) in each of three ranges (A-C) plus left-hand reverser. Forward/reverse powershift. Synchronized shift between gears with clutch. Shifts between ranges are unsynchronized: the tractor must be stopped and clutch used to shift range.
Weight
Weight specifications
Weight
9,920 lb operating
Shipping
8,730 lb
Ballasted
13,095 lb
Dimensions
Dimensions specifications
Wheelbase
92.5 in
Length
166 in
Width
72 in
Front axle clearance
18 in
Front tread, narrowest
63.6 in
Front tread, widest
79.4 in
Capacities
Capacities specifications
Fuel tank
41.7 gal
Hydraulic system
15.3 gal
Hydraulics
Hydraulics specifications
System
open center
Pump flow
17.6 gpm
Steering flow
6.9 gpm
Pressure
2,830 psi
Remote valves
2 to 3
Hitch
Hitch specifications
Rear hitch category
II
Control
mechanical lower link
Rear lift capacity
no record
Rear lift at 24 in (610 mm)
6,800 lb
PTO
PTO specifications
Rear PTO
independent
Rear PTO speeds
540/1000 (1.375)
Clutch
dry disc
Engine rpm at PTO speed
540@2100
Chassis
Chassis specifications
Drive
4WD
Steering
hydrostatic power
Brakes
Differential mechanical wet disc brakes
Cab
Folding 2-post ROPS or cab with heat and A/C
Tires
Tires specifications
Front
14.9-24
Rear
18.4-34
Electrical
Electrical specifications
System voltage
12 V
Battery capacity
180 Ah
Cold cranking
925 CCA
Charging
alternator
Charging output
70 A
Ground
negative
Production
Production specifications
Factories
Saltillo, Mexico
Built by
John Deere
Serial numbers
Right side of main tractor frame above front axle.