John Deere 5410
Production ended · 2WD or 4WD
PTO power · claimed
65 hp
- Weight
- 5,000 lb
- Engines
- 1 Diesel
- Built
- no record
- Price new · 2001
- $27,532
Power
| Engine | 81 hp unspecified |
|---|---|
| PTO | 65 hp claimed |
| PTO, tested | 66.5 hp |
| Drawbar | no record |
| Listed power | 81 hp engine basis |
Engines
| John Deere 4.5L 4-cyl dieselDiesel · 4 cyl | 276 ci |
|---|
Engine details
- John Deere 4.5L 4-cyl diesel
- Bore × stroke
- 4.19 in × 5 in
- Rated speed
- 2,400 rpm
- Rated power
- 81 hp
- Torque
- 179 lb·ft at 1,400 rpm
- Compression
- 17.6:1
- Cooling
- liquid-cooled
- Firing order
- 1-3-4-2
Transmissions
| CollarShiftunsynchronized gear | 9F / 3R |
|---|---|
| SyncShuttlepartially synchronized | 9F / 3R |
| PowrReverserpower shuttle | 12F / 12R |
Transmission notes
CollarShift: The Collar Shift transmission is controlled with two levers and the foot clutch. The right-hand lever selects one of three speeds (1-3) or reverse (R). The left-hand lever selects one of three ranges (A-C). The tractor must be stopped, and clutch used, to shift either speed or range.
SyncShuttle: Three speeds (1-3) plus reverse (R) in three ranges (A-C). Synchronized shifting, using the clutch, between the three forward speeds and reverse. Tractor must be stopped, and clutch used, to shift range.
PowrReverser: Four speeds (1-4) in three ranges (A-C) with forward-reverse shuttle lever. Direction changes may be done while moving using the left-hand shuttle lever. Speed changes are synchronized using the clutch. Tractor must be stopped, and clutch used, to shift ranges. At tractor start-up, clutch pedal must be cycled once before tractor will move.
Weight
| Weight | 5,000 lb shipping |
|---|---|
| Shipping | 5,000 lb |
Dimensions
| Wheelbase | 85.7 in |
|---|---|
| Length | 125.9 in |
| Width | 68.7 in |
| Height | 91.2 in unspecified |
| Front axle clearance | 18.3 in |
Capacities
| Fuel tank | 18 gal |
|---|
Hydraulics
| System | open center |
|---|---|
| Pump flow | 16.4 gpm |
| Total flow | 23 gpm |
| Steering flow | 6.6 gpm |
| Pressure | 2,855 psi |
| Steering pressure | 1,955 psi |
| Remote valves | 5 |
Hitch
| Rear hitch category | I/II |
|---|---|
| Rear lift capacity | no record |
| Rear lift at 24 in (610 mm) | 3,374 lb |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO speeds | 540 |
Chassis
| Drive | 2WD/4WD |
|---|---|
| Steering | Power steering |
| Brakes | Hydraulic wet disc brakes |
| Cab | Two-post ROPS. Cab optional |
Tires
| Front | 7.50-16 |
|---|---|
| Rear | 16.9-30 |
Electrical
| System voltage | 12 V |
|---|---|
| Cold cranking | 700 CCA |
| Charging | alternator |
| Ground | negative |
Production
| Price new | $27,532 (2001) |
|---|---|
| Factories | Augusta, Georgia, USA |
| Built by | John Deere |
Serial numbers
The serial number plate is on the right side of the John Deere 5410 tractor frame, above the front axle.
| Year | First serial |
|---|---|
| 1998 | 140000 |
| 1999 | 240001 |
| 2000 | 340000 |
| 2001 | 440000 |
Literature
- Commercial & Consumer Equipment Sales Manual John Deere, 1999
- Golf and Turf Equipment Purchasing Guide John Deere, 1998
- Grounds Care Equipment Purchasing Guide John Deere, 1999
- Grounds Care Equipment Purchasing Guide John Deere, 2000
- Operator's Manual 5210, 5310, 5410 and 5510 Tractors (OMRE71736) published in 1996*
- New 5000 Ten Series John Deere, 1998
- *Publication contains known errors.
Attachments
- front-end loader
- backhoe