Foldable ROPS. Optional deluxe ROPS with upgraded seat. Optional cab with heat and air conditioning.
Capacity
Fuel
30.3 gal (ROPS) | 114.7 L
Fuel
40.7 gal (cab) | 154.0 L
Hydraulic system
11.9 gal | 45.0 L
Front hubs
0.84 qts (each) | 0.8 L
Front diff.
5.3 qts | 5.0 L
Hydraulics
Capacity
11.9 gal | 45.0 L
Pressure
2828 psi | 195.0 bar
Valves
0, 2 or 3 (rear)
Valves
0, 2 or 3 (mid)
Pump flow
18.4 gpm | 69.6 lpm
Total flow
24.7 gpm | 93.5 lpm
Oil type
-10 o F ↑ : HY-GARD -10 o F ↑ : JDM J20C 10 o ↔104 o F : BIO HY-GARD JDM 20D | [-23 o C]
Steering flow
6.3 gpm | 23.8 lpm
Steering press.
1922 psi | 132.5 bar
Hitch
Rear Type
independent electrohyraulic
Rear lift (at 24"/610mm)
3,595 lbs | 1630 kg
Rear lift (at 24"/610mm)
4,498 lbs (optional) | 2040 kg
Pto
Rear PTO
independent electrochydraulic
Rear PTO Type
540/540E
Rear PTO Type
540/540E/1000 (optional)
Dimensions
Wheelbase
85.6 inches | 217 cm
Weight
6591 to 8150 pounds
Front tire
11L-15
Rear tire
480/80R30
Serial location
(no label)
Serial number plate on the left side of the 5095M ttactor frame, above the front axle.
Electrical
Ground
negative
Charging system
alternator
Charging amps
70 (ROPS)
Charging amps
90 (cab)
Charging amps
120 (optional)
Battery CCA
925
Battery volts
12
Battery Group
31
Engine
Engine detail
(no label)
John Deere PowerTech M 4045
(no label)
turbocharged diesel
(no label)
4-cylinder
(no label)
liquid-cooled
Displacement
276 ci | 4.5 L
Bore/Stroke
4.19x5.00 inches | 106 x 127 mm
Emissions
Tier 3
Rated Power (gross)
95 hp | 70.8 kW
Air cleaner
dry
Rated RPM
2200
Torque
372 lb-ft | 504.4 Nm
Torque RPM
1600
Starter volts
12
Coolant capacity (Coolant)
12 qts | 11.4 L
Engine oil
Oil capacity
8.8 qts | 8.3 L
Transmission
Transmission options
(no label)
16-speed partially synchronized
(no label)
12-speed partially synchronized
(no label)
16-speed partially synchronized with power shuttle
(no label)
32-speed
Transmission
Transmission
SyncReverser
Type
partially synchronized
Gears
16 forward and reverse
(no label)
Operated via three levers and foot clutch. The speed shift lever selects one of four speeds. The range shift lever selects one of four ranges. Reverser lever selects direction of travel. Synchronized shuttle shift with reverser lever, or speed change with speed shift lever, while moving using the clutch. Tractor must be stopped to change ranges.
Transmission
SyncShuttle Plus
Type
partially synchronized
Gears
12 forward and 4 reverse
(no label)
Operated via two levers and foot clutch. Speed shift lever selects three forward gears or reverse. Range shift lever selects one of four ranges. Synchronized shuttle shift or speed change shift while moving using the clutch. Tractor must be stopped to change range.
Transmission
PowrReverser
Type
partially synchronized with power shuttle
Gears
16 forward and reverse
(no label)
Operated via three levers and foot clutch. The speed shift lever selects one of four speeds. The range shift lever selects one of four ranges. Reverser lever selects direction of travel. Clutchless power shift between forward and reverse using reverser lever. Synchronized speed change while moving using the speed shift lever with the clutch. Tractor must be stopped to change ranges.
Transmission
PowrReverser Plus
Gears
32 forward and 16 reverse
(no label)
Operated via three levers and foot clutch plus push button. The speed shift lever selects one of four speeds plus a push-button high or low selection. The range shift lever selects one of four ranges. Reverser lever selects direction of travel. Clutchless power shift between forward and reverse using reverser lever. Synchronized speed change while moving using the speed shift lever with the clutch. Tractor must be stopped to change ranges.