John Deere 4410
Production ended · 4WD
PTO power
30 hp
- Weight
- 2,900 lb
- Engines
- 1 Diesel
- Built
- no record
- Price new
- no record
Power
| Engine | 34.6 hp gross |
|---|---|
| PTO | 30 hp claimed; gear |
| Drawbar | no record |
| Listed power | 34 hp engine basis |
Engines
| Yanmar 1.3L 3-cyl dieselDiesel · 3 cyl | 81 ci |
|---|
Engine details
- Yanmar 1.3L 3-cyl diesel
- Bore × stroke
- 3.23 in × 3.31 in
- Rated speed
- 2,600 rpm
- Rated power
- 34.6 hp
- Compression
- 18.5:1
- Cooling
- liquid-cooled
Transmissions
| ePowrReverserpower shuttle | 12F / 12R |
|---|---|
| eHydrohydrostatic | infinite forward and reverse (3-range) |
Transmission notes
ePowrReverser: Four gears (1-4) in three ranges (A-C) with reverser lever. Gears are synchronized and may be shifted on the move using the clutch. Tractor must be stopped to shift ranges. Forward/reverse direction changes may be done on the move, without the clutch, by using the reverser lever.
eHydro: Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow.
Weight
| Weight | 2,900 lb unspecified |
|---|
Dimensions
| Wheelbase | 68 in |
|---|---|
| Length | 117 in |
| Width | 50 in |
| Height | 53.3 in unspecified |
| Ground clearance | 13.4 in |
Capacities
| Fuel tank | 10 gal |
|---|---|
| Hydraulic system | 6.3 gal |
Hydraulics
| System | open center |
|---|---|
| Pump flow | 8.6 gpm |
| Total flow | 13.9 gpm |
| Steering flow | 5.3 gpm |
| Pressure | 2,500 psi |
| Remote valves | 5 |
Hitch
| Rear hitch category | I |
|---|---|
| Rear lift capacity | no record |
| Rear lift at 24 in (610 mm) | 2,200 lb |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO speeds | 540 (1.375) |
| Mid PTO | independent |
| Mid PTO speeds | 2100 |
| Clutch | wet disc |
| Engine rpm at PTO speed | 540@2600 |
Chassis
| Drive | 4WD |
|---|---|
| Steering | power |
| Brakes | Wet disc brakes |
| Differential lock | mechanical rear |
| Final drives | spur gear |
| Cab | Two-post fixed ROPS. Two-post folding ROPS optional |
Tires
| Front | 7.00-14 |
|---|---|
| Rear | 11.2-24 |
Electrical
| System voltage | 12 V |
|---|---|
| Cold cranking | 500 CCA |
| Charging | alternator |
| Charging output | 40 A |
| Ground | negative |
Production
| Factories | Augusta, Georgia, USA |
|---|---|
| Built by | John Deere |
Serial numbers
On right side of tractor frame above the front axle.
| Year | First serial |
|---|---|
| 2002 | 140001 |
| 2003 | 240001 |
| 2004 | 340001 |
Literature
- Operator's Manual 410 and 420 Loaders (OMC49370) 2005
- 4000 TEN Series 18 To 48 HP John Deere, 2001
- The New John Deere 4000 TEN Series Tractors 2002
- 4000 TEN Series - The tractor redefined John Deere, 2001
- 4000 TEN Series - Take Command John Deere, 2001
- 4000 TEN Series Product Information Handbook John Deere, 2003
- Commercial & Consumer Equipment Purchase Guide John Deere, 2005
Attachments
- 60" mid-mount mower deck
- 72" mid-mount mower deck
- snowblower
- blade
- front-end loader
- backhoe