All 112 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production
Manufacturer
John Deere
(no label)
Row-Crop tractor
(no label)
Built in Waterloo, Iowa, USA
Original price
$29,992 (1982 Syncro-Range ROPS 2WD )
Original price
$36,549 (1982 Power Shift Cab 2WD )
Engine
(no label)
John Deere 6.6L 6-cyl diesel
Transmission
(no label)
16-speed partial power shift
(no label)
8-speed partially synchronized
(no label)
8-speed full power shift
(no label)
13-speed creeper
Power
Drawbar (claimed)
77 hp | 57.4 kW
PTO (claimed)
90 hp | 67.1 kW
Drawbar (tested)
76.56 hp | 57.1 kW
PTO (tested)
90.80 hp | 67.7 kW
Mechanical
Drive
4x2 2WD
Drive
4x4 HFWD 4WD
Differential lock
pedal-actuated hydraulic
(no label)
Power steering
(no label)
Differential hydraulic wet disc brakes
(no label)
Sound-Gard cab standard.
Capacity
Fuel
37 gal | 140.0 L
Hydraulic system
11 gal | 41.6 L
Hydraulics
Type
closed center
Capacity
11 gal | 41.6 L
Valves
1 or 2
Pump flow
23 gpm | 87.1 lpm
Hitch
Rear Type
II/I
Rear lift
4316 lbs | 1957 kg
Rear lift
5395 lbs | 2447 kg
Pto
Rear PTO
independent
Rear PTO Type
540/1000 (1.375)
Dimensions
Wheelbase
104 inches | 264 cm
Weight
9630 to 10490 pounds
Front tire
9.5L-15
Rear tire
18.4-38
Serial location
(no label)
Serial number plate on the rear of the 4040, above the PTO shaft.
Electrical
Ground
negative
Charging system
alternator
Batteries
2
Battery CCA
850
Battery volts
6
Engine
Engine detail
(no label)
John Deere
(no label)
diesel
(no label)
6-cylinder
(no label)
liquid-cooled
Displacement
404 ci | 6.6 L
Bore/Stroke
4.25x4.75 inches | 108 x 121 mm
Pre-heating
ether injection
Compression
16.7:1
Rated RPM
2200
Idle RPM
800-2400
Operating RPM
1500-2200
Firing order
1-5-3-6-2-4
Starter volts
12
Oil capacity
17 qts | 16.1 L
Coolant capacity (Coolant)
24 qts | 22.7 L
Transmission
Transmission options
(no label)
16-speed partial power shift
(no label)
8-speed partially synchronized
(no label)
8-speed full power shift
(no label)
13-speed creeper
Transmission
Transmission
John Deere Quad-Range
Type
partial power shift
Gears
16 forward and 6 reverse
Oil capacity
62 qts | 58.7 L
(no label)
Four gears (1-4) in four ranges (A-D). Power shift between pairs 1-2 and 3-4 in each range, with synchronized shift between 2-3. Two reverses in ranges A-C. Tractor must be stopped, and clutch used, to shift ranges. Power shift is provided hy a hydraulically-controlled planetary that provides an under-drive to each gear.
Transmission
John Deere Syncro-Range
Type
partially synchronized
Gears
8 forward and 2 reverse
Oil capacity
62 qts | 58.7 L
(no label)
Four shift stations with two forward gears each. Reverse gear in stations one and two. Shifts between gears within a station are synchronized (clutch must be used). Tractor must be stopped, and clutch used, to select shift stations.
Transmission
John Deere Powershift
Type
full power shift
Gears
8 forward and 4 reverse
Oil capacity
54 qts | 51.1 L
(no label)
Clutchless shift-on-the-move power shift between all eight forward and four reverse gears. Inching pedal provided for hooking up implements and other precision work.
Transmission
John Deere Syncro-Range Creeper
Type
creeper
Gears
13 forward and 5 reverse
Oil capacity
62 qts | 58.7 L
(no label)
Adds creeper to gears 1-5 of the Syncro-Range transmission. Creeper engaged by clutching and moving creeper control lever.