John Deere 4040: all source data

All 89 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
ManufacturerJohn Deere
(no label)Row-Crop tractor
(no label)Built in Mannheim, Baden-Württemberg, Germany
Engine
(no label)John Deere 5.9L 6-cyl diesel
Fuel tank37 gal | 140.0 L
Transmission
(no label)16-speed partial power shift
(no label)8-speed partially synchronized
(no label)13-speed creeper
Power
Engine (gross)120.7 hp | 90.0 kW
Engine (net)108.6 hp | 81.0 kW
PTO (claimed)93.8 hp | 69.9 kW
Mechanical
Drive4x2 2WD
Drive4x4 HFWD 4WD
Final drivesplanetary
Differential lockhydro-mechanical
(no label)Power steering
(no label)Wet disc brakes
(no label)Sound-Gard cab standard.
Hydraulics
Typeclosed center
Pressure2250 psi | 155.1 bar
Pump flow25.4 gpm | 96.1 lpm
Hitch
Rear TypeII
Controlposition and draft control
Rear lift10590 lbs | 4803 kg
Pto
Rear PTOindependent
Clutchhydraulic wet disc
Rear PTO Type540/1000 (1.375)
Dimensions
Wheelbase104 inches | 264 cm
Weight11070 lbs | 5021 kg
Front tire11.00-16
Rear tire18.4-38
Serial location
(no label)Serial number tag on the front right of the tractor frame, above the front axle.
Electrical
Groundnegative
Charging systemalternator
Charging amps55
Batteries2
Battery volts12
Battery AH88

Engine

Engine detail
(no label)John Deere
(no label)turbocharged diesel
(no label)6-cylinder
(no label)liquid-cooled
Displacement359 ci | 5.9 L
Bore/Stroke4.19x4.33 inches | 106 x 110 mm
Power (net)108.6 hp | 81.0 kW
Power (gross)120.7 hp | 90.0 kW
Fuel systemdirect injection
Compression16.8:1
Rated RPM2200
Idle RPM750-2360
Operating RPM1300-2200
Torque298.7 lb-ft | 405.0 Nm
Torque RPM1300
Starterelectric
Starter volts12

Transmission

Transmission options
(no label)16-speed partial power shift
(no label)8-speed partially synchronized
(no label)13-speed creeper
Transmission
TransmissionQuad-Range
Typepartial power shift
Gears16 forward and 6 reverse
Clutchhydraulic wet disc
(no label)Four gears (1-4) in four ranges (A-D). Power shift between pairs 1-2 and 3-4 in each range, with synchronized shift between 2-3. Two reverses in ranges A-C. Tractor must be stopped, and clutch used, to shift ranges. Power shift is provided hy a hydraulically-controlled planetary that provides an under-drive to each gear.
TransmissionSyncro-Range
Typepartially synchronized
Gears8 forward and 2 reverse
Clutchhydraulic wet disc
(no label)Four shift stations with two forward gears each. Reverse gear in stations one and two. Shifts between gears within a station are synchronized (clutch must be used). Tractor must be stopped, and clutch used, to select shift stations.
TransmissionSyncro-Range Creeper
Typecreeper
Gears13 forward and 4 reverse
Clutchhydraulic wet disc
(no label)Adds creeper to gears 1-5 of the Syncro-Range transmission. Creeper engaged by clutching and moving creeper control lever.

Dimensions

Tires
Ag front11.00-16
Ag rear18.4-38
Ag front10.00-16
Ag rear16.9-38
Ag rear20.8-38
Dimensions
Wheelbase104 inches | 264 cm
Length179.2 inches | 455 cm
Height (cab)112.6 inches | 286 cm
Shipping weight11070 lbs | 5021 kg
Clearance (front axle)20.3 inches | 51 cm
Clearance (rear axle)27 inches | 68 cm
Clearance (drawbar)14.2 inches | 36 cm
Rack-and-pinion rear axle (Rack-and-pinion)3.39 by 92 inches | 86 by 2336 mm
Rack-and-pinion rear axle (Rack-and-pinion)3.39 by 96 inches | 86 by 2438 mm
Rack-and-pinion rear axle (Rack-and-pinion)3.39 by 109 inches | 86 by 2768 mm
Front tread53.5 to 74 inches | 135 to 187 cm