John Deere 3120: all source data

All 69 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
ManufacturerJohn Deere
(no label)Compact Utility tractor
(no label)Built in Augusta, Georgia, USA
Engine
(no label)Yanmar 1.5L 3-cyl diesel
Transmission
(no label)hydrostatic
Power
Engine29.5 hp | 22.0 kW
Mechanical
(no label)Four-wheel drive
Steeringpower
(no label)Wet disc brakes
(no label)Two-post folding ROPS.
Capacity
Fuel13.5 gal | 51.1 L
Hydraulic system6.8 gal | 25.7 L
Hydraulics
Typeopen center
Capacity6.8 gal | 25.7 L
Valves5
Pump flow8.6 gpm | 32.6 lpm
Total flow13.9 gpm | 52.6 lpm
Hitch
Rear TypeI
Rear lift (at ends)2530 lbs | 1147 kg
Pto
Rear PTOindependent
Rear PTO Type540
Mid PTOoptional
Mid PTO Type2100
Dimensions
Wheelbase68 inches | 172 cm
Weight3000 lbs | 1360 kg
Front tire7-14
Rear tire11.2-24
Electrical
Groundnegative
Charging amps40
Battery CCA500
Battery volts12

Engine

Engine detail
(no label)Yanmar 3TNV84
(no label)diesel
(no label)3-cylinder
(no label)liquid-cooled
Displacement91.5 ci | 1.5 L
Bore/Stroke3.3x3.54 inches | 84 x 90 mm
EmissionsTier II
Power29.5 hp | 22.0 kW
Fuel systemdirect injection
Compression18.5:1
Rated RPM2600
Torque66.7 lb-ft | 90.4 Nm
Torque RPM1560
Starter volts12
Oil capacity5.1 qts | 4.8 L
Coolant capacity (Coolant)5.6 qts | 5.3 L

Transmission

Transmission
TransmissionSauer-Danfoss eHydro
Typehydrostatic
Gearsinfinite forward and reverse (3-range)
(no label)Controlled by two foot pedals and range shift lever. Tractor must be stopped before shifting ranges. Cruise control standard. SpeedMatch allows maximum speed to be limited. MotionMatch allows acceleration rate to be set. LoadMatch allows engine RPMs to be set, tractor will adjust speed to maintain RPMs.

Dimensions

Tires
Ag front7-14
Ag rear11.2-24
Lawn/turf front27x8.5-15
Lawn/turf rear41x14-20
Lawn/turf front25x10.5LL-15
Lawn/turf rear41x18LL-16.1
Industrial front25x8.5-14
Industrial rear15-19.5
Industrial front27x8.5-15
Industrial rear43x16-20
Dimensions
Wheelbase68 inches | 172 cm
Length120.2 inches | 305 cm
Width52.4 inches | 133 cm
Height (hood)57 inches | 144 cm
Height (ROPS)93.3 inches | 236 cm
Weight3000 lbs | 1360 kg
Clearance (rear axle)12.2 inches | 30 cm
Rear tread40.6/45.3/48.9/53.1/56.6 inches | 103/115/124/134/143 cm