John Deere 2025R: all source data
All 83 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | John Deere |
|---|
| (no label) | Compact Utility tractor |
|---|
| (no label) | Built in Augusta, Georgia, USA |
|---|
| Original price | $14,434 (2013) |
|---|
| Original price | $15,348 (2014) |
|---|
Engine| (no label) | Yanmar 1.3L 3-cyl diesel |
|---|
Transmission| (no label) | hydrostatic |
|---|
Power| Engine (gross) | 24.2 hp | 18.0 kW |
|---|
| Engine | 25 hp | 18.6 kW |
|---|
| PTO (claimed) | 18 hp | 13.4 kW |
|---|
Mechanical| (no label) | Four-wheel drive |
|---|
| Final drives | spur gear |
|---|
| Differential lock | mechanical rear |
|---|
| (no label) | Power steering |
|---|
| (no label) | Wet disc brakes |
|---|
| (no label) | Two-post folding ROPS. |
|---|
Capacity| Fuel | 6.1 gal | 23.1 L |
|---|
| Hydraulic system | 2.6 gal | 9.8 L |
|---|
| Front axle | 0.9 qts | 0.9 L |
|---|
Hydraulics| Type | open center |
|---|
| Capacity | 2.6 gal | 9.8 L |
|---|
| Pressure | 2421 psi | 166.9 bar |
|---|
| Pump flow | 3.4 gpm | 12.9 lpm |
|---|
| Total flow | 5.6 gpm | 21.2 lpm |
|---|
| Steering flow | 2.2 gpm | 8.3 lpm |
|---|
Hitch| Rear Type | I |
|---|
| Control | position control |
|---|
| Rear lift (at ends) | 1433 lbs | 650 kg |
|---|
| Rear lift (at 24"/610mm) | 1150 lbs | 521 kg |
|---|
Pto| Rear PTO | independent |
|---|
| Clutch | wet disc |
|---|
| Rear PTO Type | 540 (1.375) |
|---|
| Engine RPM | 540@3000 |
|---|
| Mid PTO | independent |
|---|
| Mid PTO Type | 2000 |
|---|
| Engine RPM | 2100@3000 |
|---|
Dimensions| Wheelbase | 63 inches | 160 cm |
|---|
| Weight | 1660 lbs | 752 kg |
|---|
Serial location| (no label) | Right side of tractor frame, above and behind the front axle. |
|---|
Electrical| Ground | negative |
|---|
| Charging system | alternator |
|---|
| Charging amps | 20 |
|---|
| Charging volts | 12 |
|---|
| Battery CCA | 500 |
|---|
| Battery volts | 12 |
|---|
Engine
Engine detail| (no label) | Yanmar 3TNV80 |
|---|
| (no label) | diesel |
|---|
| (no label) | 3-cylinder |
|---|
| (no label) | liquid-cooled inline |
|---|
| Displacement | 77.3 ci | 1.3 L |
|---|
| Bore/Stroke | 3.15x3.31 inches | 80 x 84 mm |
|---|
| Power | 25 hp | 18.6 kW |
|---|
| Rated Power (gross) | 24.2 hp | 18.0 kW |
|---|
| Fuel system | indirect injection |
|---|
| Air cleaner | dual stage dry |
|---|
| Compression | 23.4:1 |
|---|
| Rated RPM | 3000 |
|---|
| Starter | electric |
|---|
| Starter volts | 12 |
|---|
| Starter power | 1.6 hp | 1.2 kW |
|---|
| Coolant capacity (Coolant) | 3.4 qts | 3.2 L |
|---|
Engine oil| Oil capacity | 3.4 qts | 3.2 L |
|---|
| Oil change | 200 h |
|---|
Transmission
Transmission| Type | hydrostatic |
|---|
| Gears | infinite forward and reverse (2-range) |
|---|
| Oil capacity | 10.4 qts | 9.8 L |
|---|
| Oil type | Deere Hy-Gard |
|---|
Dimensions
Tires| Industrial front | 23x8.5-12 |
|---|
| Industrial rear | 31x12-16.5 |
|---|
Dimensions| Wheelbase | 63 inches | 160 cm |
|---|
| Length | 109.2 inches | 277 cm |
|---|
| Width | 37 inches | 93 cm |
|---|
| Width | 51 inches | 129 cm |
|---|
| Height (hood) | 47.2 inches | 119 cm |
|---|
| Height (ROPS) | 89 inches | 226 cm |
|---|
| Height (Folded ROPS) | 66.8 inches | 169 cm |
|---|
| Clearance (front axle) | 12.5 inches | 31 cm |
|---|
| (no label) | Flange rear axle |
|---|
| Front tread | 31.1 inches | 78 cm |
|---|
Weight| Shipping | 1660 lbs | 752 kg |
|---|
| Max Drawbar | 562 lbs | 254 kg |
|---|
| Max front axle | 1940 lbs | 879 kg |
|---|
| Max rear axle (Max) | 2426 lbs | 1100 kg |
|---|