Jeep CJ-3A
Production ended · 4WD
Power
Power specifications| Engine | 60 hp unspecified |
|---|
| PTO | no record |
|---|
| Drawbar | 25.9 hp tested |
|---|
| Belt pulley | 28.4 hp tested |
|---|
| Listed power | 60 hp engine basis |
|---|
| Plows rated | 2 |
|---|
Engines
Engines fitted to the Jeep CJ-3A| Willys 2.2L 4-cyl gasolineGasoline · 4 cyl | 134 ci |
|---|
Engine details
- Willys 2.2L 4-cyl gasoline
- Bore × stroke
- 3.13 in × 4.38 in
- Rated speed
- 2,400 rpm
- Rated power
- 60 hp
- Compression
- 6.5:1
- Cooling
- liquid-cooled
- Firing order
- 1-3-4-2
Transmissions
Transmissions for the Jeep CJ-3A| Borg-Warner T-90sliding gear | 6F / 2R |
|---|
Transmission notes
Borg-Warner T-90: Three gears (1-3) plus reverse (R) with a two-speed Spicer transfer case.
Weight
Weight specifications| Weight | 2,037 lb shipping |
|---|
| Shipping | 2,037 lb |
|---|
Dimensions
Dimensions specifications| Wheelbase | 80 in |
|---|
| Length | 130 in |
|---|
| Height | 66.8 in |
|---|
| Ground clearance | 8.1 in |
|---|
| Front tread, narrowest | 48.2 in |
|---|
| Front tread, widest | 48.2 in |
|---|
| Rear tread, narrowest | 48.2 in |
|---|
| Rear tread, widest | 48.2 in |
|---|
Capacities
Capacities specifications| Fuel tank | no record |
|---|
Hydraulics
Hydraulics specifications| Pump flow | no record |
|---|
Hitch
Hitch specifications| Rear hitch category | I |
|---|
| Rear lift capacity | no record |
|---|
PTO
PTO specifications| Rear PTO | optional |
|---|
| Rear PTO speeds | 540 (1.375) |
|---|
Chassis
Chassis specifications| Drive | 4WD |
|---|
| Steering | manual |
|---|
| Brakes | Hydraulic drum brakes |
|---|
| Cab | Open operator station |
|---|
Tires
Tires specifications| Front | 6x16 |
|---|
| Rear | 6x16 |
|---|
Electrical
Electrical specifications| System voltage | 6 V |
|---|
| Ground | negative |
|---|
Production
Production specifications| Factories | Toledo, Ohio, USA |
|---|
| Built by | Jeep |
|---|