International Harvester Cub Lo-Boy: all source data

All 63 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
ManufacturerInternational Harvester
(no label)Utility tractor
(no label)Built in Louisville, Kentucky, USA
(no label)The Cub Lo-Boy is very similar to the standard Cub. The Lo-Boy using shorter front end spindles and rotating the final drive made the Lo-Boy about 8 inches shorter than the standard Cub. Both the standard Cub and the Lo-Boy had the IH "Cultivision" offset engine and steering.
Engine
(no label)International Harvester 1.0L 4-cyl gasoline
Fuel tank7.5 gal | 28.4 L
Transmission
(no label)3-speed sliding gear
Power
Engine13.4 hp | 10.0 kW
Drawbar (claimed)10 hp | 7.5 kW
PTO (claimed)11 hp | 8.2 kW
Belt (claimed)9.76 hp | 7.3 kW
Plows1 (12 inch)
Mechanical
(no label)Two-wheel drive
Final drivesbull gear
(no label)Manual steering
(no label)Open operator station.
Hydraulics
Typeopen center
Pressure1200 psi | 82.7 bar
Pump flow2.8 gpm | 10.6 lpm
Hitch
TypeIH Fast Hitch
Pto
Rear PTOindependent
Rear PTO TypeCub-10 (0.9375)
Engine RPM-1800@1800
Dimensions
Wheelbase62 inches | 157 cm
Weight1620 lbs | 734 kg
Front tire4.00-12
Rear tire8.3-24
Serial location
(no label)Serial number plate on the front-right side of the tractor, behind the steering gear housing.
Electrical
Groundpositive (early)
Groundnegative (late)
Battery volts6 (early)
Battery volts12 (late)

Engine

Engine detail
(no label)International Harvester C60
(no label)gasoline
(no label)4-cylinder
(no label)liquid-cooled
Displacement59.5 ci | 1.0 L
Bore/Stroke2.625x2.75 inches | 67 x 70 mm
Power13.4 hp | 10.0 kW
Rated RPM1800
Firing order1-3-4-2
Starter volts6 (early)
Starter volts12 (late)
Oil capacity3 qts | 2.8 L
Coolant capacity (Coolant)9.75 qts | 9.2 L
Sparkplug gap0.023 inches | 0.584 mm
Intake valve clearance0.013 inches (cold) | 0.330 mm
Exhaust valve clearance0.013 inches (cold) | 0.330 mm

Transmission

Transmission
Typesliding gear
Gears3 forward and 1 reverse
Clutchdry disc

Dimensions

Tires
Ag front4.00-12
Ag rear8.3-24
Dimensions
Wheelbase62 inches | 157 cm
Length92 inches | 233 cm
Width48.25 inches | 122 cm
Height (steering wheel)56.25 inches | 142 cm
Weight1620 lbs | 734 kg
Clearance (front axle)14 inches | 35 cm
Clearance (rear axle)14 inches | 35 cm
Rear axle1.56 inch diameter | 39 mm
Front tread43 to 55 inches | 109 to 139 cm
Rear tread40 to 56 inches | 101 to 142 cm