International Harvester 100: all source data
All 37 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | International Harvester |
|---|
| (no label) | Utility tractor |
|---|
| (no label) | Built in Louisville, Kentucky, USA |
|---|
| Total built | 135 |
|---|
| (no label) | Original price was $1,800 in 1956 |
|---|
Engine| (no label) | International Harvester 2.0L 4-cyl gasoline |
|---|
| Fuel tank | 11 gal | 41.6 L |
|---|
Transmission| (no label) | 4-speed sliding gear |
|---|
Power| Drawbar (claimed) | 17.8 hp | 13.3 kW |
|---|
| PTO (claimed) | 20.13 hp | 15.0 kW |
|---|
| Drawbar (tested) | 17.83 hp | 13.3 kW |
|---|
| Belt (tested) | 20.13 hp | 15.0 kW |
|---|
Mechanical| (no label) | Two-wheel drive |
|---|
| (no label) | Manual steering |
|---|
| (no label) | Open operator station. |
|---|
Dimensions| Wheelbase | 71.125 inches | 180 cm |
|---|
| Weight | 2600 lbs | 1179 kg |
|---|
| Front tire | 5.00-16 |
|---|
| Rear tire | 9-24 |
|---|
Engine
Engine detail| (no label) | International Harvester C-123 |
|---|
| (no label) | gasoline |
|---|
| (no label) | 4-cylinder |
|---|
| (no label) | liquid-cooled |
|---|
| Displacement | 122.7 ci | 2.0 L |
|---|
| Bore/Stroke | 3.125x4.00 inches | 79 x 102 mm |
|---|
| Air cleaner | oil bath |
|---|
| Compression | 6.5:1 |
|---|
| Rated RPM | 1400 |
|---|
| Firing order | 1-3-4-2 |
|---|
| Starter volts | 6 |
|---|
| Oil capacity | 5 qts | 4.7 L |
|---|
Transmission
Transmission| Type | sliding gear |
|---|
| Gears | 4 forward and 1 reverse |
|---|
Dimensions
Tires| Ag front | 5.00-16 |
|---|
| Ag rear | 9-24 |
|---|
Dimensions| Wheelbase | 71.125 inches | 180 cm |
|---|
| Shipping weight | 2600 lbs | 1179 kg |
|---|