Holder Cultitrac A12: all source data
All 47 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | Holder |
|---|
Engine| (no label) | Sachs 0.6L 1-cyl diesel |
|---|
Transmission| (no label) | 6-speed |
|---|
Power| Engine | 12 hp | 8.9 kW |
|---|
Mechanical| (no label) | Four-wheel drive |
|---|
| (no label) | Drum brakes |
|---|
| (no label) | Open operator station. |
|---|
Capacity| Fuel | 2.5 gal | 9.5 L |
|---|
| Hydraulic system | 1 gal | 3.8 L |
|---|
Hydraulics| Type | open center |
|---|
| Capacity | 1 gal | 3.8 L |
|---|
| Pressure | 1850 psi | 127.6 bar |
|---|
| Pump flow | 2.6 gpm | 9.8 lpm |
|---|
Pto| Rear PTO | independent |
|---|
| Rear PTO Type | 540/920 |
|---|
Dimensions| Wheelbase | 45 inches | 114 cm |
|---|
| Weight | 1500 lbs | 680 kg |
|---|
| Front tire | 5.00x16 |
|---|
| Rear tire | 5.00x16 |
|---|
Belt pulley| Diameter | 8.25 inches | 20 cm |
|---|
| Width | 4.75 inches | 12 cm |
|---|
| RPM | 1550 |
|---|
Engine
Engine detail| (no label) | Sachs D600L |
|---|
| (no label) | diesel |
|---|
| (no label) | 1-cylinder |
|---|
| (no label) | air-cooled |
|---|
| (no label) | Two-stroke engine. |
|---|
| Displacement | 36.9 ci | 0.6 L |
|---|
| Bore/Stroke | 3.465x3.937 inches | 88 x 100 mm |
|---|
| Power | 12 hp | 8.9 kW |
|---|
| Fuel system | direct injection |
|---|
| Air cleaner | oil bath |
|---|
| Compression | 20:1 |
|---|
| Rated RPM | 2200 |
|---|
| Starter volts | 12 |
|---|
Transmission
Transmission| Gears | 6 forward and 3 reverse |
|---|
| Clutch | dry disc |
|---|
Dimensions
Tires| Ag front | 5.00x16 |
|---|
| Ag rear | 5.00x16 |
|---|
| Ag front | 5.50x16 |
|---|
| Ag rear | 5.50x16 |
|---|
Dimensions| Wheelbase | 45 inches | 114 cm |
|---|
| Length | 80 inches | 203 cm |
|---|
| Width | 30 inches | 76 cm |
|---|
| Height (steering wheel) | 44 inches | 111 cm |
|---|
| Weight | 1500 lbs | 680 kg |
|---|
| Ground clearance | 9.5 inches | 24 cm |
|---|