All 84 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production
Manufacturer
Fiat
(no label)
Orchard/Vineyard tractor
(no label)
Original price was $25,200 in 1990
Engine
(no label)
Fiat 3.9L 4-cyl diesel
Transmission
(no label)
12-speed partially synchronized
(no label)
12-speed mechanical shuttle
(no label)
20-speed creeper shuttle
Power
Engine
78.9 hp | 58.8 kW
PTO (claimed)
70 hp | 52.2 kW
Mechanical
(no label)
Two- or four-wheel drive
Final drives
planetary
Differential lock
mechanical rear
(no label)
Power steering
(no label)
Wet disc brakes
Trailer brakes
hydraulic
(no label)
Two-post mid-mount ROPS.
Hydraulics
Type
open center
Pressure
2697 psi | 186.0 bar
Pump flow
8.7 gpm | 32.9 lpm
Hitch
Rear Type
II/I
Control
position and lower-link draft control
Pto
Rear PTO
independent
Rear PTO Type
540 (1.375)
Rear PTO Type
540/1000 (1.375)
Engine RPM
540@2200
Engine RPM
1000@2380
Dimensions
2WD Wheelbase (2WD)
78.8 inches | 200 cm
4WD Wheelbase (4WD)
83.1 inches | 211 cm
Weight
4806 to 5269 pounds
Front tire
5.50-16
2WD Rear tire (2WD)
12.4-28
Electrical
Ground
negative
Charging system
alternator
Watts (rated)
400
Battery volts
12
Battery AH
132
Engine
Engine detail
(no label)
Fiat 8045.05
(no label)
diesel
(no label)
4-cylinder
(no label)
liquid-cooled
Displacement
238.5 ci | 3.9 L
Bore/Stroke
4.09x4.53 inches | 104 x 115 mm
Power
78.9 hp | 58.8 kW
Air cleaner
dry
Compression
17:1
Rated RPM
2500
Firing order
1-3-4-2
Starter
electric
Starter volts
12
Intake valve clearance
0.010 inches (cold) | 0.254 mm
Exhaust valve clearance
0.014 inches (cold) | 0.356 mm
Transmission
Transmission options
(no label)
12-speed partially synchronized
(no label)
12-speed mechanical shuttle
(no label)
20-speed creeper shuttle
Transmission
Type
partially synchronized
Gears
12 forward and 4 reverse
Clutch
279.4mm dry disc
(no label)
Four synchronized gears (1-4) in three ranges (I-III) plus reverse range. Tractor must be stopped, and clutch used, to shift range.
Type
mechanical shuttle
Gears
12 forward and reverse
Clutch
279.4mm dry disc
(no label)
Four synchronized gears (1-4) in three ranges (I-III) with mechanical reverser.
Type
creeper shuttle
Gears
20 forward and 12 reverse
Clutch
254mm dry disc
(no label)
Four synchronized gears (1-4) in three ranges (I-III) with mechanical reverser and creeper. The shuttle-creeper lever is moved forward or back for direction control. Pushing the lever down and forward engages the creeper range.