Ferguson TO-35: all source data

All 87 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
Manufacturer	Ferguson
(no label)	Utility tractor
(no label)	Built in Detroit, Michigan, USA

Engine
(no label)	Continental 2.2L 4-cyl gasoline
(no label)	Standard Diesel Company 2.3L 4-cyl diesel

Transmission
(no label)	6-speed unsynchronized gear

Mechanical
(no label)	Two-wheel drive
(no label)	Manual steering
(no label)	Differential mechanical expanding shoe brakes
(no label)	Open operator station

Serial location
(no label)	Data plate to left of steering wheel

Engine options
(no label)	Continental 2.2L 4-cyl gasoline
(no label)	Standard Diesel Company 2.3L 4-cyl diesel

Engine detail
(no label)	Continental Z-134
(no label)	gasoline
(no label)	4-cylinder
(no label)	liquid-cooled
Displacement	134 ci \| 2.2 L
Bore/Stroke	3.3125x3.875 inches \| 84 x 98 mm
Fuel use	2.761 gal/hour \| 10.5 l/hour
Air cleaner	oil bath
Compression	6.6:1
Rated RPM	2000
Starter volts	6 (early)
Starter volts	12
Coolant capacity (Coolant)	10 qts \| 9.5 L
(no label)	Standard Diesel Company 23C
(no label)	diesel
(no label)	4-cylinder
(no label)	liquid-cooled vertical L-head
(no label)	The 23C diesel engine was first available in the TO-35 in 1958.
Displacement	137.8 ci \| 2.3 L
Bore/Stroke	3.3125x4.00 inches \| 84 x 102 mm
Fuel use	2.249 gal/hour \| 8.5 l/hour
Air cleaner	oil bath
Pre-heating	glow plugs
Compression	20:1
Rated RPM	2000
Firing order	1-3-4-2
Starter volts	12
Coolant capacity (Coolant)	9 qts \| 8.5 L
Intake valve clearance	0.012 inches (cold) \| 0.305 mm
Exhaust valve clearance	0.008 inches (cold) \| 0.203 mm

Engine oil
Oil capacity	7.5 qts \| 7.1 L

Transmission
Transmission	Dual Range
Type	unsynchronized gear
Gears	6 forward and 2 reverse
Oil capacity	32 qts \| 30.3 L
Oil type	50 o F ↑ : SAE90 50 o F ↓ : SAE80 \| [10 o C]
(no label)	Three speeds, plus reverse, with high and low ranges. Range shift lever has low, high, and 'S' positions. Lever must be in S to start tractor.