Ferguson TEA-20: all source data
All 64 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | Ferguson |
|---|
| (no label) | Utility tractor |
|---|
| Factories | Coventry, England |
|---|
Engine| (no label) | Standard 1.9L 4-cyl gasoline |
|---|
| (no label) | Standard 2.1L 4-cyl gasoline |
|---|
| Fuel tank | 8.2 gal | 31.0 L |
|---|
Transmission| (no label) | 4-speed unsynchronized gear |
|---|
Power| Belt (claimed) | 23.9 hp (80mm) | 17.8 kW |
|---|
| Belt (claimed) | 28 hp (85mm) | 20.9 kW |
|---|
Mechanical| (no label) | Two-wheel drive |
|---|
| (no label) | Manual steering |
|---|
| (no label) | Differential mechanical shoe brakes |
|---|
| (no label) | Open operator station. |
|---|
Pto| Rear PTO | transmission |
|---|
| Rear PTO Type | 540 (1.125) |
|---|
| Engine RPM | 545@1500 |
|---|
Dimensions| Wheelbase | 70 inches | 177 cm |
|---|
| Weight | 2500 lbs | 1134 kg |
|---|
| Front tire | 4-19 |
|---|
| Rear tire | 10-28 |
|---|
Engine
Engine options| (no label) | Standard 1.9L 4-cyl gasoline |
|---|
| (no label) | Standard 2.1L 4-cyl gasoline |
|---|
Engine detail| (no label) | Standard |
|---|
| (no label) | gasoline |
|---|
| (no label) | 4-cylinder |
|---|
| (no label) | liquid-cooled |
|---|
| (no label) | The original, 80mm bore, engine was used until tractor serial number 172598 (engine number 100204) in 1951. |
|---|
| Displacement | 112.9 ci | 1.9 L |
|---|
| Bore/Stroke | 3.19x3.75 inches | 81 x 95 mm |
|---|
| Air cleaner | oil bath |
|---|
| Rated RPM | 2000 |
|---|
| Idle RPM | 400-2000 |
|---|
| Firing order | 1-3-4-2 |
|---|
| Starter volts | 6 |
|---|
| Intake valve clearance | 0.010 inches (cold) | 0.254 mm |
|---|
| Exhaust valve clearance | 0.012 inches (cold) | 0.305 mm |
|---|
| (no label) | Standard |
|---|
| (no label) | gasoline |
|---|
| (no label) | 4-cylinder |
|---|
| (no label) | liquid-cooled |
|---|
| (no label) | The 85mm bore engine was used in the TEA-20 beginning in 1951. The larger engine provided an increase to 28 horsepower. |
|---|
| Displacement | 127.4 ci | 2.1 L |
|---|
| Bore/Stroke | 3.375x3.65 inches | 86 x 93 mm |
|---|
| Firing order | 1-3-4-2 |
|---|
| Starter volts | 6 |
|---|
| Starter volts | 12 (late) |
|---|
Engine oil| Oil capacity | 6 qts | 5.7 L |
|---|
| Oil change | 120 h |
|---|
Transmission
Transmission| Type | unsynchronized gear |
|---|
| Gears | 4 forward and 1 reverse |
|---|
Dimensions
Tires| Ag front | 4-19 |
|---|
| Ag rear | 10-28 |
|---|
Dimensions| Wheelbase | 70 inches | 177 cm |
|---|
| Length | 115 inches | 292 cm |
|---|
| Width | 64 inches | 162 cm |
|---|
| Width | 54 inches (TEC/TEE) | 137 cm |
|---|
| Height | 52 inches | 132 cm |
|---|
| Weight | 2500 lbs | 1134 kg |
|---|
| Ground clearance | 13 inches | 33 cm |
|---|
| Front tread | 48 to 80 inches | 121 to 203 cm |
|---|
| Front tread | 44 to 60 inches (TEC/TEE) | 111 to 152 cm |
|---|
| Rear tread | 48 to 76 inches | 121 to 193 cm |
|---|
| Rear tread | 42 to 66 inches (TEC/TEE) | 106 to 167 cm |
|---|