All 49 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production
Manufacturer
Farmall (a part of International Harvester)
(no label)
Row-Crop tractor
(no label)
Built in Louisville, Kentucky, USA
(no label)
Original price was $2,100 in 1958
Engine
(no label)
International Harvester 2.0L 4-cyl gasoline
Fuel tank
11 gal | 41.6 L
Transmission
(no label)
4-speed sliding gear
(no label)
4-speed creeper
Power
Drawbar (claimed)
20.0 hp | 14.9 kW
PTO (claimed)
24.95 hp | 18.6 kW
Drawbar (tested)
25.00 hp | 18.6 kW
Belt (tested)
28.06 hp | 20.9 kW
Mechanical
(no label)
Two-wheel drive
(no label)
Manual steering
(no label)
Differential mechanical dry disc brakes
(no label)
Open operator station.
Pto
Rear PTO Type
540
Dimensions
Weight
3440 lbs | 1560 kg
Front tire
5.00-15
Rear tire
11.2-36
Serial location
(no label)
Right side of clutch housing
Belt pulley
Diameter
8 inches | 20 cm
Width
6 inches | 15 cm
RPM
1,487
Speed
3,114 ft/min | 949.15 meters/min
Engine
Engine detail
(no label)
International Harvester C123
(no label)
gasoline
(no label)
4-cylinder
(no label)
liquid-cooled vertical I-head
Displacement
122.7 ci | 2.0 L
Bore/Stroke
3.125x4.00 inches | 79 x 102 mm
Compression
6.94:1
Rated RPM
1800
Firing order
1-3-4-2
Starter volts
6
Oil capacity
5 qts | 4.7 L
Coolant capacity (Coolant)
15 qts | 14.2 L
Transmission
Transmission options
(no label)
4-speed sliding gear
(no label)
4-speed creeper
Transmission
Type
sliding gear
Gears
4 forward and 1 reverse
Transmission
Hydra-Creeper
Type
creeper
Gears
4 forward and reverse
(no label)
The Hydra-Creeper unit consisted of a hydraulic motor that attached to the tractor's PTO shaft. The motor was powered from the tractor's hydraulics and drove the tractor through the PTO shaft.