Deutz-Fahr DX 160: all source data

All 59 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
ManufacturerDeutz-Fahr
(no label)Row-Crop tractor
Engine
(no label)Deutz 6.1L 6-cyl diesel
Fuel tank66 gal | 249.8 L
Transmission
(no label)24-speed partially synchronized
Power
Engine150 hp | 111.9 kW
Drawbar (tested)121.64 hp | 90.7 kW
PTO (tested)145.41 hp | 108.4 kW
Mechanical
(no label)Two- or four-wheel drive
Final drivesplanetary
Differential lockhydraulic foot-operated
(no label)Power steering
(no label)Hydraulic wet disc brakes
(no label)Cab standard.
Hydraulics
Typeopen center
Pressure2538 psi | 175.0 bar
Valves1 to 3
Pump flow15.3 gpm | 57.9 lpm
Total flow27 gpm | 102.2 lpm
Hitch
Rear TypeIII
Rear lift (at ends)14330 lbs | 6500 kg
Pto
Rear PTOindependent
Rear PTO Type1000 (1.75)
Rear PTO Type540/1000
Engine RPM1000@1920
Dimensions
Wheelbase111.5 inches | 283 cm
Weight12171 to 14840 pounds
Front tire11.00-16
Rear tire20.8x38 (2WD)
Electrical
Groundnegative
Battery volts12

Engine

Engine detail
(no label)Deutz BF6L 913
(no label)turbocharged diesel
(no label)6-cylinder
(no label)air-cooled
Displacement373.9 ci | 6.1 L
Bore/Stroke4.016x4.92 inches | 102 x 125 mm
Power150 hp | 111.9 kW
Compression15.5:1
Rated RPM2200
Starter volts12
Oil capacity16.9 qts | 16.0 L

Transmission

Transmission
TransmissionTriple Range
Typepartially synchronized
Gears24 forward and 8 reverse
Clutchdry disc
Oil capacity79.25 qts | 75.0 L
(no label)Four gears (1-4) in three ranges (low, medium, high) with two-speed power shift.

Dimensions

Tires
Standard tires (ag)Front: 11.00-16. Rear: 20.8x38 (2WD)
Standard tires (ag)Front: 14.9-28. Rear: 20.8x38 (4WD)
Dimensions
Wheelbase111.5 inches | 283 cm
Length185.8 inches | 471 cm
Width93.3 inches | 236 cm
Height112 inches | 284 cm
Rear tread70 to 86 inches | 177 to 218 cm
Weight
2WD12171 lbs | 5520 kg
4WD13185 lbs | 5980 kg
Operating14840 lbs | 6731 kg
Ballasted18710 lbs | 8486 kg