All 74 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production
Manufacturer
Chamberlain (a part of John Deere)
(no label)
Row-Crop tractor
(no label)
Built in Welshpool, Australia
Total built
510
Engine
(no label)
John Deere 5.9L 6-cyl diesel
Transmission
(no label)
12-speed partial power shift
Power
Engine (net)
100.5 hp | 74.9 kW
PTO (claimed)
94 hp | 70.1 kW
Mechanical
Drive
4x2 2WD
Drive
4x4 MFWD 4WD (optional)
Steering
hydrostatic power
(no label)
Hydraulic wet disc brakes
(no label)
Cab standard with air-conditioning.
Capacity
Fuel
57.3 gal | 216.9 L
Hydraulic system
7.2 gal | 27.3 L
Hydraulics
Type
open center
Capacity
7.2 gal | 27.3 L
Pressure
2500 psi | 172.4 bar
Valves
4 (max)
Valves
3 (with 3pt)
Total flow
15.6 gpm | 59.0 lpm
Hitch
Rear Type
II
Control
top-link sensing
Rear lift (at 24"/610mm)
5,355 lbs | 2429 kg
Rear lift (at 24"/610mm)
6,517 lbs (optional) | 2956 kg
Pto
Rear PTO
independent
Clutch
hydraulic disc
Rear PTO Type
540
Rear PTO Type
1000 (optional)
Dimensions
2WD fixed Wheelbase (2WD fixed)
104.2 inches | 264 cm
2WD fixed Wheelbase (2WD fixed)
104.9 inches (2WD) | 266 cm
2WD fixed Wheelbase (2WD fixed)
112.4 inches (4WD) | 285 cm
Weight
11671 to 12302 pounds
Front tire
11.00x16
Rear tire
23.1x34 (2WD)
Electrical
Charging system
alternator
Charging amps
55
Batteries
2
Battery volts
6
Engine
Engine detail
(no label)
John Deere
(no label)
diesel
(no label)
6-cylinder
(no label)
liquid-cooled
Displacement
359 ci | 5.9 L
Bore/Stroke
4.19x4.33 inches | 106 x 110 mm
Power (net)
100.5 hp | 74.9 kW
Air cleaner
dry with safety element
Compression
16.8:1
Rated RPM
2200
Idle RPM
800-2375
Torque
276.6 lb-ft | 375.1 Nm
Torque RPM
1300
Starter volts
12
Oil capacity
12 qts | 11.4 L
Coolant capacity (Coolant)
20 qts | 18.9 L
Transmission
Transmission
Transmission
Hi-Lo
Type
partial power shift
Gears
12 forward and 4 reverse
Clutch
14-inch dry disc
Oil capacity
45.4 qts | 43.0 L
(no label)
Three gears (1-3) in two ranges (Slow-Fast) with hydraulic Hi-Lo power shift. Range shifts are synchronized with the clutch. Tractor must be stopped to shift gears (1-3 and R).