Chamberlain 4080: all source data
All 41 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | Chamberlain (a part of John Deere) |
|---|
| (no label) | Built in Welshpool, Australia |
|---|
| Total built | 2,438 |
|---|
Engine| (no label) | John Deere 5.4L 6-cyl diesel |
|---|
| Fuel tank | 48.1 gal | 182.1 L |
|---|
Transmission| (no label) | 12-speed two-speed power shift |
|---|
Power| Engine (net) | 85 hp | 63.4 kW |
|---|
| PTO (claimed) | 85 hp | 63.4 kW |
|---|
Mechanical| (no label) | Two-wheel drive |
|---|
| (no label) | Power steering |
|---|
| (no label) | Sedan cab with heat and air-conditioning. |
|---|
Hydraulics| Type | open center |
|---|
| Valves | 2 |
|---|
| Pump flow | 13.8 gpm | 52.2 lpm |
|---|
Hitch| Rear Type | II |
|---|
| Rear lift (at 24"/610mm) | 4773 lbs | 2165 kg |
|---|
Dimensions| Weight | 10340 lbs | 4690 kg |
|---|
| Front tire | 9.00-16 |
|---|
| Rear tire | 23.1-30 |
|---|
Engine
Engine detail| (no label) | John Deere 6-329 |
|---|
| (no label) | diesel |
|---|
| (no label) | 6-cylinder |
|---|
| (no label) | liquid-cooled |
|---|
| Displacement | 329 ci | 5.4 L |
|---|
| Bore/Stroke | 4.02x4.33 inches | 102 x 110 mm |
|---|
| Power (net) | 85 hp | 63.4 kW |
|---|
| Compression | 16.8:1 |
|---|
| Rated RPM | 2200 |
|---|
| Torque | 249 lb-ft | 337.6 Nm |
|---|
| Torque RPM | 1300 |
|---|
| Starter type | electric |
|---|
Transmission
Transmission| Transmission | Hi-Lo |
|---|
| Type | two-speed power shift |
|---|
| Gears | 12 forward and 4 reverse |
|---|
Dimensions
Tires| Ag front | 9.00-16 |
|---|
| Ag rear | 23.1-30 |
|---|
Dimensions| Length | 167.4 inches | 425 cm |
|---|
| Width | 87.4 inches | 221 cm |
|---|
| Height (exhaust) | 105.5 inches | 267 cm |
|---|
| Weight | 10340 lbs | 4690 kg |
|---|