Challenger MT765E: all source data
All 65 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | Challenger (a part of AGCO) |
|---|
| (no label) | Agricultural Crawler tractor |
|---|
| (no label) | Built in Jackson, Minnesota, USA |
|---|
Engine| (no label) | AGCO POWER 9.8L 7-cyl diesel |
|---|
| Fuel tank | 174 gal | 658.6 L |
|---|
| Fuel tank | 249 gal | 942.5 L |
|---|
| Exhaust fluid (DEF) | 23 gal | 87.1 L |
|---|
Transmission| (no label) | 16-speed full power shift |
|---|
Power| Engine (gross) | 375 hp | 279.6 kW |
|---|
| Drawbar (tested) | 272.10 hp | 202.9 kW |
|---|
| PTO (tested) | 357.07 hp | 266.3 kW |
|---|
Mechanical| Drive | crawler |
|---|
| Steering | electro-hydraulic differential |
|---|
| (no label) | Hydraulic wet disc brakes |
|---|
| (no label) | Cab standard. |
|---|
Hydraulics| Pressure | 2900 psi | 200.0 bar |
|---|
| Valves | 4 to 6 |
|---|
| Pump flow | 58.1 gpm | 219.9 lpm |
|---|
| Pump flow | 85 gpm | 321.7 lpm |
|---|
| SCV flow | 26.4 gpm | 99.9 lpm |
|---|
| SCV flow | 36 gpm | 136.3 lpm |
|---|
Hitch| Rear Type | IVN/III |
|---|
| Rear lift | 16000 lbs | 7257 kg |
|---|
| Drawbar | Cat. 4 standard |
|---|
| Drawbar | Cat. 3 optional |
|---|
Pto| Rear PTO | independent |
|---|
| Rear PTO Type | 1000 (1.75) |
|---|
Dimensions| Weight | 30131 lbs | 13667 kg |
|---|
| (no label) | 14-inch tracks |
|---|
Electrical| Ground | negative |
|---|
| Charging system | alternator |
|---|
| Charging amps | 300 (2x 150amp) |
|---|
| Batteries | 2 |
|---|
| Battery volts | 12 |
|---|
Engine
Engine detail| (no label) | AGCO POWER |
|---|
| (no label) | turbocharged diesel |
|---|
| (no label) | 7-cylinder 28-valve |
|---|
| (no label) | liquid-cooled |
|---|
| Displacement | 598 ci | 9.8 L |
|---|
| Bore/Stroke | 4.370x5.709 inches | 111 x 145 mm |
|---|
| Emissions | Tier IV |
|---|
| Emission control | selective catalytic reduction (SCR) |
|---|
| Power (gross) | 375 hp | 279.6 kW |
|---|
| Maximum Power | 405 hp | 302.0 kW |
|---|
| Rated RPM | 2100 |
|---|
| Torque | 1334 lb-ft | 1808.9 Nm |
|---|
| Torque RPM | 1500 |
|---|
| Starter volts | 12 |
|---|
Transmission
Transmission| Transmission | Caterpillar |
|---|
| Type | full power shift |
|---|
| Gears | 16 forward and 4 reverse |
|---|
| Clutch | hydraulic wet disc |
|---|
Dimensions
Tracks| Width | 14 inches | 35 cm |
|---|
| Width | 16 inches | 40 cm |
|---|
| Width | 18 inches | 45 cm |
|---|
| Width | 25 inches | 63 cm |
|---|
| Width | 30 inches | 76 cm |
|---|
| Width | 34 inches | 86 cm |
|---|
Dimensions| Gauge | 72 to 88 inches | 182 to 223 cm |
|---|
| Gauge | 80 to 120 inches | 203 to 304 cm |
|---|
| Gauge | 120 to 160 inches | 304 to 406 cm |
|---|
Weight| Shipping | 30131 lbs | 13667 kg |
|---|
| Max capacity (Max) | 39000 lbs | 17690 kg |
|---|
| Max Drawbar | 10000 lbs (Cat 3) | 4536 kg |
|---|
| Max Drawbar | 12000 lbs (Cat 4) | 5443 kg |
|---|