Challenger MT765D: all source data
All 60 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | Challenger (a part of AGCO) |
|---|
| (no label) | Agricultural Crawler tractor |
|---|
| (no label) | Built in Jackson, Minnesota, USA |
|---|
Engine| (no label) | AGCO POWER 8.4L 6-cyl diesel |
|---|
| Fuel tank | 109 gal | 412.6 L |
|---|
| Fuel tank | 169 gal (wide gauge) | 639.7 L |
|---|
| Exhaust fluid (DEF) | 18 gal | 68.1 L |
|---|
Transmission| (no label) | 16-speed full power shift |
|---|
Power| Engine (gross) | 350 hp | 261.0 kW |
|---|
| PTO (claimed) | 285 hp | 212.5 kW |
|---|
| Drawbar (tested) | 267.55 hp | 199.5 kW |
|---|
| PTO (tested) | 338.67 hp | 252.5 kW |
|---|
Mechanical| Drive | crawler |
|---|
| Steering | electro-hydraulic differential |
|---|
| (no label) | Hydraulic wet disc brakes |
|---|
| (no label) | Cab standard. |
|---|
Hydraulics| Type | closed-center pressure-flow compensated (PFC) |
|---|
| Pressure | 2900 psi | 200.0 bar |
|---|
| Valves | 4 to 6 |
|---|
| Pump flow | 43.5 gpm | 164.6 lpm |
|---|
| Pump flow | 59 gpm (optional) | 223.3 lpm |
|---|
| SCV flow | 36 gpm | 136.3 lpm |
|---|
Hitch| Rear Type | III/IIIN |
|---|
| Rear lift | 16000 lbs | 7257 kg |
|---|
Pto| Rear PTO | independent |
|---|
| Rear PTO Type | 1000 (1.75) |
|---|
Dimensions| Weight | 31075 lbs | 14095 kg |
|---|
| (no label) | 14-inch tracks |
|---|
Electrical| Ground | negative |
|---|
| Charging system | alternator |
|---|
| Charging amps | 300 (2x 150amp) |
|---|
| Batteries | 2 |
|---|
| Battery volts | 12 |
|---|
Engine
Engine detail| (no label) | AGCO POWER |
|---|
| (no label) | turbocharged air-to-air intercooled diesel |
|---|
| (no label) | 6-cylinder 24-valve |
|---|
| (no label) | liquid-cooled |
|---|
| Displacement | 513.8 ci | 8.4 L |
|---|
| Bore/Stroke | 4.370x5.709 inches | 111 x 145 mm |
|---|
| Emissions | Interim Tier IV |
|---|
| Emission control | selective catalytic reduction (SCR) |
|---|
| Power (gross) | 350 hp | 261.0 kW |
|---|
| Maximum Power | 386 hp | 287.8 kW |
|---|
| Starter volts | 12 |
|---|
Transmission
Transmission| Transmission | Caterpillar |
|---|
| Type | full power shift |
|---|
| Gears | 16 forward and 4 reverse |
|---|
| Clutch | hydraulic wet disc |
|---|
Dimensions
Tracks| Width | 14 inches | 35 cm |
|---|
| Width | 16 inches | 40 cm |
|---|
| Width | 18 inches | 45 cm |
|---|
| Width | 25 inches | 63 cm |
|---|
| Width | 30 inches | 76 cm |
|---|
Dimensions| Gauge | 72 to 88 inches | 182 to 223 cm |
|---|
| Gauge | 80 to 120 inches (optional) | 203 to 304 cm |
|---|
| Gauge | 120 to 160 inches (optional) | 304 to 406 cm |
|---|
Weight| Shipping | 31075 lbs | 14095 kg |
|---|
| Max capacity (Max) | 36000 lbs | 16329 kg |
|---|
| Max Drawbar | 10000 lbs | 4536 kg |
|---|
| Max Drawbar | 12000 lbs (Cat. 3) | 5443 kg |
|---|