Challenger MT297B: all source data

All 51 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
DistributorChallenger (a part of AGCO)
ManufacturerIseki
(no label)Compact Utility tractor
(no label)Built in Matsuyama, Japan
Engine
(no label)Iseki 3.0L 4-cyl diesel
Fuel tank13.2 gal | 50.0 L
Transmission
(no label)12-speed
Power
Engine59.1 hp | 44.1 kW
PTO (claimed)46.4 hp | 34.6 kW
Mechanical
(no label)Four-wheel drive
(no label)Power steering
(no label)Wet disc brakes
(no label)Two-post folding ROPS.
Hydraulics
Typeopen center
Pressure2276 psi | 156.9 bar
Pump flow11.5 gpm | 43.5 lpm
Total flow17.5 gpm | 66.2 lpm
Steering flow6.0 gpm | 22.7 lpm
Hitch
Rear TypeII/I
Rear lift (at ends)3748 lbs | 1700 kg
Rear lift (at 24"/610mm)3307 lbs | 1500 kg
Pto
Rear PTOindependent
Rear PTO Type540 (1.375)
Dimensions
Wheelbase79 inches | 200 cm
Weight4,078 lbs | 1849 kg
Front tire9.5-16
Rear tire16.9-26
Electrical
Groundnegative
Charging systemalternator
Battery volts12

Engine

Engine detail
(no label)Iseki
(no label)diesel
(no label)4-cylinder
(no label)liquid-cooled
Displacement180 ci | 3.0 L
Power59.1 hp | 44.1 kW
Rated RPM2600
Starter volts12

Transmission

Transmission
TransmissionPowerShuttle
Gears12 forward and reverse
(no label)Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch.

Dimensions

Tires
Ag front9.5-16
Ag rear16.9-26
Industrial front12-16.5
Industrial rear18.4-24
Dimensions
Wheelbase79 inches | 200 cm
Length134.6 inches | 341 cm
Width69.7 inches | 177 cm
Height91.7 inches | 232 cm
Weight4,078 lbs | 1849 kg
Ground clearance15.7 inches | 39 cm