Challenger MT255: all source data

All 60 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
DistributorChallenger (a part of AGCO)
ManufacturerIseki
(no label)Compact Utility tractor
(no label)Built in Matsuyama, Japan
Engine
(no label)Iseki 1.5L 3-cyl diesel
Fuel tank6 gal | 22.7 L
Transmission
(no label)9-speed constant mesh
Power
Engine (gross)28.4 hp | 21.2 kW
PTO (claimed)24.1 hp | 18.0 kW
Mechanical
(no label)Four-wheel drive
Differential lockmechanical rear
(no label)Power steering
(no label)Wet disc brakes
(no label)Two-post fixed ROPS.
Hydraulics
Typeopen center
Pressure2130 psi | 146.9 bar
Pump flow7.4 gpm | 28.0 lpm
Total flow9.9 gpm | 37.5 lpm
Steering flow2.5 gpm | 9.5 lpm
Hitch
Rear TypeI
Controlposition control
Controldraft control
Rear lift (at ends)1,984 lbs | 899 kg
Rear lift (at 24"/610mm)1,323 lbs | 600 kg
Pto
Rear PTOlive
Clutchdry disc
Rear PTO Type540 (1.375)
Mid PTOoptional
Mid PTO Type2000
Dimensions
Wheelbase64.5 inches | 163 cm
Weight2,248 lbs | 1019 kg
Front tire6-14
Rear tire12.4-16
Electrical
Groundnegative
Charging systemalternator
Battery volts12

Engine

Engine detail
(no label)Iseki
(no label)diesel
(no label)3-cylinder
(no label)liquid-cooled
Displacement89.3 ci | 1.5 L
Bore/Stroke3.39x3.30 inches | 86 x 84 mm
Power (gross)28.4 hp | 21.2 kW
Rated RPM2500
Starterelectric
Starter volts12

Transmission

Transmission
Typeconstant mesh
Gears9 forward and 3 reverse

Dimensions

Tires
Standard tires (ag)Front: 6-14. Rear: 12.4-16
Lawn/turf front24x8.50-12
Lawn/turf rear315/80D-16
Industrial front25x8.50-14
Industrial rear12.5/80-18
Dimensions
Wheelbase64.5 inches | 163 cm
Length116.5 inches | 295 cm
Width51 inches | 129 cm
Height (ROPS)79.3 inches | 201 cm
Weight2,248 lbs | 1019 kg
Front tread42 inches | 106 cm
Rear tread37.2 to 37.25 inches | 94 to 94 cm