J.I. Case 22-40: all source data
All 36 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | J.I. Case |
|---|
| (no label) | Standard-tread tractor |
|---|
| (no label) | Built in Racine, Wisconsin, USA |
|---|
| Total built | 1,750 |
|---|
Engine| (no label) | J.I. Case 10.5L 4-cyl kerosene |
|---|
Transmission| (no label) | 2-speed sliding gear |
|---|
Power| Drawbar (claimed) | 22 hp | 16.4 kW |
|---|
| Belt (claimed) | 40 hp | 29.8 kW |
|---|
| Plows | 4-5 (14-inch) |
|---|
| Drawbar (tested) | 31.27 hp | 23.3 kW |
|---|
| Belt (tested) | 49.97 hp | 37.3 kW |
|---|
Mechanical| (no label) | Two-wheel drive |
|---|
| (no label) | Manual steering |
|---|
| (no label) | Open operator station. |
|---|
Dimensions| Weight | 10,200 lbs | 4626 kg |
|---|
| Rear tire | 56x16 |
|---|
Belt pulley| Diameter | 16.5 inches | 41 cm |
|---|
| Width | 8.5 inches | 21 cm |
|---|
| RPM | 850 |
|---|
| Speed | 3,669 ft/min | 1118.31 meters/min |
|---|
Engine
Engine detail| (no label) | J.I. Case |
|---|
| (no label) | kerosene |
|---|
| (no label) | 4-cylinder |
|---|
| (no label) | liquid-cooled |
|---|
| Displacement | 641 ci | 10.5 L |
|---|
| Bore/Stroke | 5.50x6.75 inches | 140 x 171 mm |
|---|
| Rated RPM | 850 |
|---|
| Starter type | hand-crank |
|---|
Transmission
Transmission| Transmission | J.I. Case |
|---|
| Type | sliding gear |
|---|
| Gears | 2 forward and 1 reverse |
|---|
Dimensions
Tires| Ag rear | 56x16 (steel) |
|---|
Dimensions| Length | 153 inches | 388 cm |
|---|
| Width | 82.5 inches | 209 cm |
|---|
| Height | 79.5 inches | 201 cm |
|---|
| Weight | 10,200 lbs | 4626 kg |
|---|