J.I. Case 18-32: all source data
All 37 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | J.I. Case |
|---|
| (no label) | Standard-tread tractor |
|---|
| (no label) | Built in Racine, Wisconsin, USA |
|---|
Engine| (no label) | J.I. Case 6.3L 4-cyl kerosene |
|---|
Transmission| (no label) | 2-speed gear |
|---|
Power| Drawbar (claimed) | 18 hp | 13.4 kW |
|---|
| Belt (claimed) | 32 hp | 23.9 kW |
|---|
| Plows | 3 |
|---|
| Drawbar (tested) | 24.52 hp | 18.3 kW |
|---|
| Belt (tested) | 36.73 hp | 27.4 kW |
|---|
Mechanical| (no label) | Two-wheel drive |
|---|
| Steering | manual |
|---|
| (no label) | Open operator station. |
|---|
Dimensions| Weight | 6,500 lbs | 2948 kg |
|---|
| Rear tire | 52x14 |
|---|
Serial location| (no label) | Left rear fender. |
|---|
Belt pulley| Diameter | 16 inches | 40 cm |
|---|
| Width | 7.5 inches | 19 cm |
|---|
| RPM | 1000 |
|---|
| Speed | 4,180 ft/min | 1274.06 meters/min |
|---|
Engine
Engine detail| (no label) | J.I. Case |
|---|
| (no label) | kerosene |
|---|
| (no label) | 4-cylinder |
|---|
| (no label) | liquid-cooled |
|---|
| Displacement | 381.7 ci | 6.3 L |
|---|
| Bore/Stroke | 4.50x6.00 inches | 114 x 152 mm |
|---|
| Rated RPM | 1000 |
|---|
| Starter type | hand-crank |
|---|
Transmission
Transmission| Transmission | J.I. Case |
|---|
| Type | gear |
|---|
| Gears | 2 forward and 1 reverse |
|---|
Dimensions
Dimensions| Length | 127 inches | 322 cm |
|---|
| Width | 72 inches | 182 cm |
|---|
| Height | 68 inches | 172 cm |
|---|
| Operating weight | 6,500 lbs | 2948 kg |
|---|