J.I. Case 1690: all source data

All 54 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
ManufacturerJ.I. Case
(no label)Utility tractor
(no label)Built in Meltham Mills, Huddersfield, England
(no label)Original price was $30,000 in 1983
Engine
(no label)J.I. Case 5.4L 6-cyl diesel
Fuel tank26 gal | 98.4 L
Transmission
(no label)12-speed synchromesh
(no label)12-speed partial power shift
Power
PTO (claimed)90 hp | 67.1 kW
Drawbar (tested)72.55 hp | 54.1 kW
PTO (tested)90.39 hp | 67.4 kW
Mechanical
(no label)Two- or four-wheel drive
(no label)Power steering
(no label)Hydraulic wet disc brakes
(no label)Two-post ROPS. Cab optional.
Hydraulics
Typeopen center
Pump flow20 gpm | 75.7 lpm
Hitch
Rear TypeII
Pto
Rear PTOindependent
Rear PTO Type540/1000
Dimensions
Wheelbase100.5 inches | 255 cm
Weight8755 lbs | 3971 kg
Front tire10.00-16
Rear tire18.4-34
Serial location
(no label)Serial number stamped into the top of the tractor's frame on the right side, next to the engine.
Electrical
Groundnegative
Battery volts12

Engine

Engine detail
(no label)J.I. Case
(no label)diesel
(no label)6-cylinder
(no label)liquid-cooled
Displacement329 ci | 5.4 L
Bore/Stroke3.939x4.50 inches | 100 x 114 mm
Air cleanerdual paper elements
Compression16:1
Rated RPM2200
Starter volts12
Coolant capacity (Coolant)16 qts | 15.1 L

Transmission

Transmission options
(no label)12-speed synchromesh
(no label)12-speed partial power shift
Transmission
Typesynchromesh
Gears12 forward and 4 reverse
Clutchhydraulic dry disc
Typepartial power shift
Gears12 forward and 4 reverse
Clutchhydraulic dry disc
(no label)Three gears, plus reverse, with a four-range power shift.

Dimensions

Tires
Ag front10.00-16
Ag rear18.4-34
Dimensions
Wheelbase100.5 inches | 255 cm
4WD ROPS Operating weight (4WD ROPS)8755 lbs | 3971 kg
Ballasted weight12470 lbs | 5656 kg
4WD Front tread59 to 71 inches | 149 to 180 cm
Rear tread60.75 to 85 inches | 154 to 215 cm