J.I. Case 10-20: all source data
All 41 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.
Overview
Production| Manufacturer | J.I. Case |
|---|
| (no label) | Built in Racine, Wisconsin, USA |
|---|
| Total built | 6,679 |
|---|
| (no label) | Original price was $890 in 1916 |
|---|
| (no label) | The right-side rear wheel was driven. The left-side rear wheel could idle or it could be locked in to provide two-wheel drive. |
|---|
Engine| (no label) | J.I. Case 5.6L 4-cyl distillate |
|---|
| Fuel tank | 20 gal | 75.7 L |
|---|
Transmission| (no label) | 1-speed gear |
|---|
Power| Drawbar (claimed) | 10 hp | 7.5 kW |
|---|
| Belt (claimed) | 20 hp | 14.9 kW |
|---|
| Plows | 3 (14-inch) |
|---|
| Drawbar (tested) | 15.28 hp | 11.4 kW |
|---|
| Belt (tested) | 22.81 hp | 17.0 kW |
|---|
Mechanical| Drive | 3x2 2WD |
|---|
| Final drives | bull gear |
|---|
| (no label) | Manual steering |
|---|
| (no label) | Open operator station. |
|---|
Dimensions| Weight | 4900 to 5080 pounds |
|---|
| Rear tire | 52x22 |
|---|
Belt pulley| Diameter | 17 inches | 43 cm |
|---|
| Width | 6.5 inches | 16 cm |
|---|
| RPM | 900 |
|---|
Engine
Engine detail| (no label) | J.I. Case |
|---|
| (no label) | distillate |
|---|
| (no label) | 4-cylinder |
|---|
| (no label) | liquid-cooled inline |
|---|
| Displacement | 340.5 ci | 5.6 L |
|---|
| Bore/Stroke | 4.25x6.00 inches | 108 x 152 mm |
|---|
| Fuel system | carburetor |
|---|
| Rated RPM | 900 |
|---|
| Starter type | hand crank |
|---|
| Coolant capacity (Coolant) | 40 qts | 37.9 L |
|---|
Transmission
Transmission| Type | gear |
|---|
| Gears | 1 forward and reverse |
|---|
Dimensions
Tires| Ag rear | 52x22 (steel) |
|---|
| Ag rear | 52x10 (steel) |
|---|
Dimensions| Length | 150 inches | 381 cm |
|---|
| Width | 67 inches | 170 cm |
|---|
| Height | 60 inches | 152 cm |
|---|
| Shipping weight | 4900 lbs | 2222 kg |
|---|
| Operating weight | 5080 lbs | 2304 kg |
|---|