Bad Boy 1025
In production · 4WD
PTO power · claimed
18.8 hp
Power
Power specifications| Engine | 24.6 hp gross |
|---|
| PTO | 18.8 hp claimed |
|---|
| Drawbar | no record |
|---|
| Listed power | 24 hp engine basis |
|---|
Engines
Engines fitted to the Bad Boy 1025| Yanmar 1.3L 3-cyl dieselDiesel · 3 cyl | 77 ci |
|---|
Engine details
- Yanmar 1.3L 3-cyl diesel
- Bore × stroke
- 3.15 in × 3.31 in
- Rated speed
- 3,000 rpm
- Rated power
- 24.6 hp
- Compression
- 23:1
- Cooling
- liquid-cooled inline
Transmissions
Transmissions for the Bad Boy 1025| hydrostatichydrostatic | infinite forward and reverse (2-range) |
|---|
Weight
Weight specifications| Weight | 1,638 lb unspecified |
|---|
Dimensions
Dimensions specifications| Wheelbase | 57.5 in |
|---|
| Length | 104 in |
|---|
| Width | 45.8 in |
|---|
| Ground clearance | 9.4 in |
|---|
Capacities
Capacities specifications| Fuel tank | 5.8 gal |
|---|
Hydraulics
Hydraulics specifications| System | open center |
|---|
| Pump flow | 4.2 gpm |
|---|
| Total flow | 7 gpm |
|---|
| Steering flow | 2.8 gpm |
|---|
| Pressure | 2,205 psi |
|---|
| Steering pressure | 1,566 psi |
|---|
Hitch
Hitch specifications| Rear hitch category | IN |
|---|
| Control | position control |
|---|
| Rear lift capacity | 1,323 lb |
|---|
| Rear lift at 24 in (610 mm) | 450 lb |
|---|
PTO
PTO specifications| Rear PTO | independent |
|---|
| Rear PTO speeds | 540 (1.375) |
|---|
| Mid PTO | independent |
|---|
| Mid PTO speeds | 1-inch 15-spline |
|---|
| Engine rpm at PTO speed | 540@2893 |
|---|
Chassis
Chassis specifications| Drive | 4WD |
|---|
| Steering | Power steering |
|---|
| Brakes | Wet disc brakes |
|---|
| Differential lock | mechanical rear |
|---|
| Cab | Two-post folding ROPS |
|---|
Electrical
Electrical specifications| System voltage | 12 V |
|---|
| Cold cranking | 500 CCA |
|---|
| Charging | alternator |
|---|
| Charging output | 40 A |
|---|
| Ground | negative |
|---|
Production
Production specifications| Built by | TYM |
|---|