Allis Chalmers D10: all source data

All 75 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
Manufacturer	Allis Chalmers
(no label)	Row-Crop tractor
(no label)	Built in West Allis, Wisconsin, USA
Total built	9,100
Original price	$3400 (1967)

Engine
(no label)	Allis-Chalmers 2.3L 4-cyl gasoline
(no label)	Allis-Chalmers 2.4L 4-cyl gasoline
Fuel tank	12 gal \| 45.4 L

Transmission
(no label)	4-speed sliding gear

Mechanical
(no label)	Two-wheel drive
Steering	manual
(no label)	Differential mechanical shoe brakes
(no label)	Open operator station

Hydraulics
Type	live
Valves	1 or 2

Hitch
Rear Type	I
Type	Snap-Couple

Pto
Rear PTO	transmission , independent (later) (original)
Rear PTO Type	540

Serial location
(no label)	Serial number stamped into the flange where the engine and transmission meet on the left side of the tractor.

Belt pulley
RPM	1220
Speed	2556 ft/min \| 779.07 meters/min

Engine options
(no label)	Allis-Chalmers 2.3L 4-cyl gasoline
(no label)	Allis-Chalmers 2.4L 4-cyl gasoline

Engine detail
(no label)	Allis-Chalmers Power-Crater
(no label)	gasoline
(no label)	4-cylinder
(no label)	liquid-cooled vertical L-head
(no label)	Original engine, used until 1961.
Displacement	138.7 ci \| 2.3 L
Bore/Stroke	3.375x3.875 inches \| 86 x 98 mm
Power	31 hp \| 23.1 kW
Air cleaner	oil bath
Compression	7.75:1
Rated RPM	1650
Starter volts	6
Oil capacity	4 qts \| 3.8 L
Coolant capacity (Coolant)	8 qts \| 7.6 L
(no label)	Allis-Chalmers
(no label)	gasoline
(no label)	4-cylinder
(no label)	liquid-cooled
(no label)	The larger, 149 cubic inch, engine was introduced at serial number 3501 in 1961.
Displacement	149 ci \| 2.4 L
Bore/Stroke	3.50x3.875 inches \| 89 x 98 mm
Air cleaner	oil bath
Compression	7.5:1
Rated RPM	1650
Firing order	1-2-4-3
Starter volts	12

Transmission
Type	sliding gear
Gears	4 forward and 1 reverse