Allis-Chalmers Power Director: Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.
Power Shift: Six power shift gears (1-6) in two ranges (slow/fast). Clutch must be used to shift range. Pressing the clutch pedal half-way automatically downshifts from 5th/6th to 4th gear.
Weight
Weight specifications
Weight
16,850 lb operating
Ballasted
22,370 lb
Dimensions
Dimensions specifications
Wheelbase
106 in
Length
187 in
Width
95.5 in
Height
116 in unspecified
Front axle clearance
22 in
Rear axle clearance
29 in
Capacities
Capacities specifications
Fuel tank
60 gal
Hydraulics
Hydraulics specifications
System
closed-center load-sensitive
Pump flow
22 gpm
Total flow
45 gpm
Steering flow
9.5 gpm
Remote valves
2 or 3
Hitch
Hitch specifications
Rear hitch category
III/II
Rear lift capacity
no record
Rear lift at 24 in (610 mm)
8,200 lb
PTO
PTO specifications
Rear PTO
independent
Rear PTO speeds
1000
Chassis
Chassis specifications
Drive
2WD/4WD
Steering
hydrostatic power
Brakes
Differential hydraulic wet discs brakes
Differential lock
electro-hydraulic rear
Cab
Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player
Tires
Tires specifications
Front
10.00-16
Rear
18.4-38
Electrical
Electrical specifications
System voltage
12 V
Charging
alternator
Charging output
100 A
Production
Production specifications
Total built
2,354
Factories
West Allis, Wisconsin, USA
Built by
Allis Chalmers
Serial numbers
Serial number decal on the left side of the tractor's frame, just ahead of the fuel tank. Serial number also stamped into the casting at the rear of the tractor, above and to the left of the PTO shaft.