AGCO Allis 4650: all source data

All 101 values recorded for this model, as the source lists them and in its units. The spec sheet shows the same data checked, typed and converted.

Overview

Production
DistributorAGCO Allis (a part of AGCO)
ManufacturerSAME
(no label)Utility tractor
(no label)Built in Italy
(no label)Original price was $18,800 in 1997
Engine
(no label)SLH 2.7L 3-cyl diesel
(no label)SLH 3.1L 3-cyl diesel
Transmission
(no label)12-speed synchromesh
(no label)16-speed creeper
Power
Engine50 hp | 37.3 kW
PTO (claimed)40 hp | 29.8 kW
Drawbar (tested)37.25 hp | 27.8 kW
PTO (tested)40.36 hp | 30.1 kW
Mechanical
(no label)Two- or four-wheel drive
Final drivesspur gear
Differential lockmechanical rear
(no label)Power steering
(no label)Mechanical wet disc brakes
(no label)Four-post ROPS.
Capacity
Fuel14.5 gal | 54.9 L
Hydraulic system10.4 gal | 39.4 L
Hydraulics
Typeopen center
Capacity10.4 gal | 39.4 L
Pressure2610 psi | 180.0 bar
Valves1
Pump flow7.9 gpm | 29.9 lpm
Hitch
Rear TypeI
Controlposition and draft control
Rear lift (at ends)4630 lbs | 2100 kg
Rear lift (at 24"/610mm)2645 lbs | 1199 kg
Pto
Rear PTOindependent
Clutchdry disc
Rear PTO Type540 (1.375)
Engine RPM540@1938
Dimensions
2WD Wheelbase (2WD)83.4 inches | 211 cm
4WD Wheelbase (4WD)82.6 inches | 209 cm
Weight4475 to 5071 pounds
Front tire6.50-16
2WD Rear tire (2WD)13.6R28
Electrical
Groundnegative
Charging systemalternator
Charging amps45
Battery volts12
Battery AH100

Engine

Engine options
(no label)SLH 2.7L 3-cyl diesel
(no label)SLH 3.1L 3-cyl diesel
Engine detail
(no label)SLH 983 L
(no label)diesel
(no label)3-cylinder
(no label)air-cooled inline
(no label)The 983 L was the original engine, but appears to have been replaced by 1992.
Displacement165.7 ci | 2.7 L
Bore/Stroke3.86x4.72 inches | 98 x 120 mm
Power50 hp | 37.3 kW
Fuel systemdirect injection
Air cleanerdry
Compression17:1
Rated RPM2200
Idle RPM675-2372
Starterelectric
Starter volts12
Oil capacity7.9 qts | 7.5 L
(no label)SLH 1053 P
(no label)diesel
(no label)3-cylinder
(no label)air-cooled inline
(no label)The AGCO parts manual identified the use of the 1053 as a detuned 4660 engine.
Displacement190.1 ci | 3.1 L
Bore/Stroke4.134x4.72 inches | 105 x 120 mm
Power50 hp | 37.3 kW
Fuel systemdirect injection
Air cleanerdry
Compression17:1
Rated RPM2200
Idle RPM675-2370
Oil capacity10 qts | 9.5 L

Transmission

Transmission options
(no label)12-speed synchromesh
(no label)16-speed creeper
Transmission
Typesynchromesh
Gears12 forward and 3 reverse
Clutch250mm dry disc
Typecreeper
Gears16 forward and 4 reverse

Dimensions

Tires
2WD Standard tires (ag) (2WD)Front: 6.50-16. Rear: 13.6R28
4WD Standard tires (ag) (4WD)Front: 9.6-20. Rear: 13.6R28
4WD Optional tires (ag) (4WD)Front: 11.2-20. Rear: 14.9R28
Dimensions
2WD Wheelbase (2WD)83.4 inches | 211 cm
4WD Wheelbase (4WD)82.6 inches | 209 cm
2WD Length (2WD)145.4 inches | 369 cm
4WD Length (4WD)144.6 inches | 367 cm
Width68 inches | 172 cm
Height (ROPS)2350 inches | 5969 cm
2WD Clearance (front axle) (2WD)15.6 inches | 39 cm
4WD Clearance (front axle) (4WD)13.2 inches | 33 cm
2WD Front tread49.2 to 65.2 inches | 124 to 165 cm
4WD Front tread54.4 to 74 inches | 138 to 187 cm
Rear tread54.6 to 74.4 inches | 138 to 188 cm
Weight
2WD Shipping (2WD)4475 lbs | 2029 kg
4WD Shipping (4WD)5071 lbs | 2300 kg
2WD Max capacity (2WD Max)8157 lbs | 3700 kg
4WD Max capacity (4WD Max)8598 lbs | 3900 kg